產品型號：Q503WD15BGF40 產品描述：5050三晶正白
相關參數：
光通量：10-12LM					光強：3000-4000mcd
電壓：3.0-3.2V					色溫：2700-3200K、6000-7000K，也可看樣板定做！
顯色指數：73-75
1000H常溫下光衰：<4%

Storage

Recommended storage environment

Temperature: 5^oC ~ 30^oC (41^oF ~ 86^oF)

Humidity: 60% RH Max.

Use within 2 days after opening of sealed vapor/ESD barrier bags.

If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, bakingtreatment should be performed using the following conditions.

Baking treatment : 70±5℃for 24 hours.

Fold the opened bag firmly and keep in dry environment.

Soldering

Reflow Soldering			Hand Soldering
	Lead Solder	Lead – free Solder
Pre-heat	120~150℃	180~200℃	Temperature	350℃Max.
Pre-heat time	120sec. Max.	120sec. Max.	Soldering time	3sec. Max.
Peak temperature	240℃Max.	260℃Max.		(one time only)
Soldering time	10sec. Max.	10sec. Max.
Condition	refer to	refer to
	Temperature-	Temperature-
	profile 1	profile 2

*After reflow soldering rapid cooling should be avoided.

[Temperature-profile (Surface of circuit board)]

Use the conditions shown to the under figure.

＜1 : Lead Solder＞＜2 : Lead-free Solder＞

[ Recommended soldering pad design ]

Use the following conditions shown in the figure.

Handling of Silicone Resin LEDs

Handling Indications

During processing, mechanical stress on the surface should be minimized as much as possible. Sharp objects of all types should not be used to pierce the sealing compound

Figure 1

In general, LEDs should only be handled from the side. By the way, this also applies to LEDs without a silicone sealant, since the surface can also become scratched.

Figure 2

When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevented.

This is assured by choosing a pick and place nozzle which is larger than the LED’s reflector area.

Dimensions for Tape

Dimensions for Reel

Notes:

1.All dimensions are in mm, tolerance is±2.0mm unless otherwise noted.

2.Specifications are subject to change without notice.

Packing

Notes:

1.All dimensions are in mm, tolerance is±2.0mm unless otherwise noted.

2.Specifications are subject to change without notice.

請認準我們的標簽和包裝方式（5050一包一K）

包裝前

除濕箱

生產車間

分光編帶機

ASM自動焊線機

倉庫！

貼片SMD3014 3020 3528 3535 5050 3014專業生產供應商，三傢工廠為您服務，專為燈條，模組，燈具廠傢研發低成本高質量的燈珠！專業十年品質。完全不用擔憂貨源找不到，質量找不好，價格談不攏的問題。你的選擇您的滿意。歡迎來電咨詢與免費索樣！附深圳分廠（高拓光電）貼片生產車間供參考，盜圖必究！

新手教學

廠傢直銷5050白光燈珠9-12LM貼片 LED貼片_LED系列產品_電子元器件_貨源_批發一路發

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。