紅外線延長器 1接收頭4發射頭。 （帶USB 5V 電源）U104-P
U104-P 型適於延長傢電或播放機的遙控紅外線信號 （此型號可延長最多4臺傢電之遙控信號）。 帶電源， 可將延長器電線之USB5V 接入播放機取得DC5V電源。
紅外線延長器可增強擺設在客廳櫃子/ 隱藏裡影音播放器其遙控紅外線.
可增強遙控紅外線信號的傢電如下； IPTV， CD/ VCD/ DVD/ Blu-Ray等影音播放器。機頂盒，錄影機，撥閉路電視， 卡啦OK，汽車影音設備（DVB，車載音響,多碟機）
公共場所酒店.旅館.洗浴中心或傢庭的機頂盒隱藏式安裝，等具備紅外遙控設備的信號遠距離延伸, 實現遠距離紅外控制!達到設備資源共享的目的特點。
特點
● 紅外遙控信號靈敏；遙控信號接收反應速度快實時轉發沒有延遲。
● 接收機抗熒光燈幹擾；本品接收機可以在大多的熒光燈環境下使用，抗幹擾能力強。
● 接收機帶狀態提示燈；接收機通電狀態是綠色，紅燈閃動時，表示已接收到你的遙控信號，並傳送出信號給發射器。
● 發射器是進口芯片定向發射，如果多臺影音傢電擺放在一起時，也不會影響其它傢電遙控信號接收。
● 體積小 ：小巧的接收機/發射器/，易於隱藏。
● 低功耗 ：功率小於0.3瓦。
● 傳送距離遠， 普通純銅線傳送100米
包裝
1. 紅外線接收頭分 USB 2米和發射頭3米
2. USB 5V 電源
規格包裝
組裝
1. 把將要延長遙控紅外線播放器的表層抹幹凈。 將發射頭貼在播放器面板的紅外接收頭位置
2. 將接收頭擺在面對遙控的方向。
3. 把USB 接入機子USB接口或USB5V 電源。
4. 接收頭 開始待機。
5. 安裝完成
Details:
Remote Control IR Repeater/ IR Extender with 1 Receiver & 4 Emitters ( for 4 AV Devices ) & USB 5V adaptor U104-P
This unit U104-P can be used to extend IR signal up to 4 Devices.
Remote Control IR Repeater/ IR Extender can be used with weak IR Remote control signal from players such as IPTV. CD/VCD/DVD/ Blu-ray, Home System, Television, Set up box, recorder, CATV, Karaoke system, etc. It is also recommended for Players/ Equipments which are concealed in console or cabinet.
Operating at 34KHz ~ 60KHz, This IR Repeater/ IR Extender is the smallest yet powerful IR repeater with high speed transmission without delay.
Series available as follow :
U Series powered by USB 5V and D series powered by DC12V
U101, U101A, D101 --- 1 Receiver 1 Emitter ( for 1 AV Equipments )
U102, U102A, D102 ---1 Receiver 2 Emitters ( for 2 AV Equipments )
U104, U104A, D104 ---1 Receiver 4 Emitters ( for 4 AV Equipments )
U101-P. U101A-P, U102-P, U102A-P, U104-P, U104-AP etc – USB 5V Adaptor Included
U101, U101A, U102, U102A, U104, U104A etc – USB Power Adaptor not included
PACKAGES :
1. USB Adaptor 5V 500mA
Our U series which is powered by USB adaptor ( Included ) can also be powered by connecting the USB cable to the USB port on your AV Equipment.
2. IR Emitter Cable ( 4 IR Eemitter heads ) to DC3.5mm Male 1m
IR Emitter Cable is one which to be stick the Emitters on the IR Point of your respective AV equipments and DC3.5mm is to connect with Item 3.
3. USB to IR Receiver Length 2m. IR Receiver to DC3.5mm 2m
USB is to be connected to USB adaptor or your AV device for power.
INSTALLATION :
1. Clean the surface of your AV equipments. Stick the IR Emitter on each the IR point of your AV Equipments. Connect the ends of two DC3.5mm cable.
2. Place the IR Receiver such a way that it is facing your remote control. It is advisable to place away from Plasma or CCFL screen as it may affect the remote control signal.
3. Connect the USB to USB Adaptor/ USB port of AV Equipment for power
4. Power up & all is ready to go.
TECHNICAL SPECIFICATION :
Receiving Frequency ( Broadband ) : 34KHz ~ 60KHz
Emitting Frequency ( Broadband ) : 38 KHz & 56KHz
Receiving Distance : 8 meter
Emitting Distance 10-20 cm
Power Consumption < 30mA
Dimension for Receiver & Emitter : 31 (L)×17 (W)×13 (H) mm, 13 (L)×8 (W)×5.5 (H) mm
Input AC 100-240V/ Output DC 5V : USB 5V 500mA
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
