１米＊１.２米平板硫化機　　青島產

青島海利來橡膠機械有限公司是一家專業從事橡膠機械、橡膠加工的專業廠家，公司現設有橡膠設備研發中心、閒置設備調劑部、橡膠機械廠、大型龍門銑加工中心、胎面膠生產廠、輪胎翻新廠六大部門。設備先進，技術力量雄厚，具有30多年生產經營經驗。

橡膠設備研發中心主要從事大型平板硫化機、鼓式硫化機、開煉機系列等橡膠專用設備的研發，專門為橡膠水壩、輸送帶等行業企業提供專用設備的研發工作。

閒置設備調劑部主要從事閒置橡膠設備的調劑，所有調劑設備進行全面檢修，安裝即可正常使用，涉及密煉機、開煉機、壓延機、擠出機、硫化機、破膠機、精煉機、切膠機、濾膠機等各類橡膠設備，業務範圍遍及全國及東南亞地區。

1、 設計結構簡潔明快、操作方便。

2、 有多種速度和速比可供選擇，能滿足廣大用戶不同配方、不同工藝的要求。

3、機架、底座全部採用焊接結構，經過退火除應力處理，外形美觀大方。

4、減速機為 6 級精度，硬齒面磨齒加工齒輪，使用壽命長，噪音低。

5、完善的緊急停車設置，能最大限度保證人員、設備的安全使用。

6、特殊設計密封結構，杜絕潤滑油洩漏現象。

7、壓延機均採用滾動軸承。

8、輥筒採用合金冷硬鑄鐵（ LTG-H ）製成，帶有旋轉接頭，表面光潔度在 Ra0.8上，可以帶中高度。中空、鑽孔輥筒可選擇。

9、單出軸結構的速比齒輪採用人字齒，傳動平穩，可以拔鍵調節速比。

10、具有各種撓度補償措施供用戶選擇，中高度、反彎曲、軸交叉。

11、有不同層次的電控系統可供用戶選擇，總線控制系統、 PLC 控制系統、普通控制系統。

12、單出軸傳動結構取消了大小驅動齒輪。

13、靈活多變的設計體系，能在最短時間內滿足客戶提出的特殊設計要求。

14、可以根據用戶需求，配置各種輔機，組成聯運生產線。

Rubber (Plastics) Calender

It is used for calendering of rubber or plastics, fabric fractioning and coating, sheeting and composite of rubber or plastics. Specification: Two roll- five roll, diameter ¢160---- ¢810mm; length 300--2500mm.I type, R type , S type.

Features of Calender

1. Tailored structure, easy to operate and install.

2. There are many speeds and speed ratios available, which can satisfy most customers’ formula and technique requirements.

3. Frame and base., looking very nice, are welded and treated by annealing for stress relieving.

4. The speed reducer is the hard-tooth surface gear reducer of Class 6 precision, which has long service life and low noise.

5. Perfect emergency stop device can ensure the safety of person and equipment

6. The seal structure with special design can eliminate the leaking phenomenon of lubricating oil

7. The calendar is equipped with rolling bearings.

8. The roll is made of chilled cast iron alloy (LTG-H), equipped with rotating joint. Its surface finish is over Ra0.8.bored and drilled rolls are optional.

9. Friction gear with single output axle adopts herringbone gear, rotating stably.

10. Full range of bending deflections is optional including middle height, inflection and axis crossing.

11. Different control systems are available to customers, including bus-mastering system, PLC control system and general control system.

12. Driving structure with single output axis takes the place of big and small driving gears.

13. The flexible design system can satisfy customers’ special design requirements within the shortest time.

14. Can as per customer requirements, equip various accessories, composing combined product line.

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。