矽膠方形LED夜光鬧鐘 溫度顯示座鐘 貪睡電子鐘 E0736
功能
3.3寸數位顯示屏
漸變鬧鈴
5分鐘重復
LED背光顯示
材質
塑料殼
3個AA電池
尺寸
產品尺寸：13045X75mm
外箱尺寸：482X302X385mm
包裝
彩盒包裝
認證
產品含CE和ROHS生產
1.調時/月鈕
2.調分鈕
3.貪睡 /亮燈鈕/ 光控裝置
4.調年/小時轉換鈕
5.功能選擇鈕
6.響鬧控製鈕
8.電池蓋
裝入電池並啟動鬧鐘
打開電池蓋（8）
按電池槽低部的正負極標示放入三節AA電池
時間設置
按動功能選擇鈕（5）到時間設置位置
按動調時/調月鈕（1）調到所需設定的時間，特別註意PM與AM時間，
當被設置成PM時間後，一個PM標示將會顯示
按調分/調日鈕/溫度鈕（2）到所需設定的分鐘
設定完成將功能選擇鈕（5）撥到鎖定的位置上
鬧鐘設置
按動功能選擇鈕（5）到鬧鐘設置位置
按動調時/調月鈕（1）調到所需設定的時間，特別註意PM與AM時間，
當被設置成PM 時間後，一個PM標示將會顯示
按調分/調日鈕/溫度鈕（2）到所需設定的分鐘
設定完成將功能選擇鈕（5）撥到鎖定的位置上
日期設置/溫度轉換
按動功能選擇鈕（5）到時間設置位置
按調年/轉換鈕（4）調到所虛設定的年份
按動調時/調月鈕（1）調到所需設定的月份
按調分/調日鈕/溫度鈕（2）到所需設定的日期
設定完成將功能選擇鈕（5）撥到鎖定的位置上
按調分/日/溫度鈕，溫度和華式度功能轉換
12/24小時顯示設置
撥動功能選擇鈕（5）到時間設置位置
按動調年/轉換鈕（4），可實現12/24小時顯示轉換
當調至24小時顯示時，一個小"24"標示會出現在左上角
設定完成將功能選擇鈕（5）撥到鎖定的位置上
響鬧開關狀態設置
撥動響鬧控製狃（6）至開的位置，一個響鬧符號將會出現，
當到達響鬧時間點上響鬧將會持續60秒鐘
撥動響鬧控製鈕（6）到關的位置將響鬧設置取消
貪睡與亮燈功能使用
響鬧聲音正在響時，按貪睡/亮燈鈕（3），響鬧聲音會停止5分鐘後再次響起，
同時背景燈會被點亮，隨時按貪睡/亮燈鈕（3）背景燈都會被點亮
光控感應控製功能使用
撥動感應選擇鈕（7）到開的位置，鬧鐘會自動根據光線的強弱來打開背景燈
微光的效果，假如外界環境光線弱，背景微光將打開，反之不會打開
推動感應選擇鈕（7）到關的位置將關閉此功能
維護與儲藏
鬧鐘不使用時，請不用裝電池。可用柔軟的佈片或紙巾清洗鬧鐘，
不要使用具有腐蝕性的或有化學成份的清洗劑清洗.
SC3019 English manual
l.When the transfer I month button
2.Adjustable points I day I temperature knob
3.Snooze button I light I light control device
4.Adjustable years I hour conversion button
5.Function selection button
6.The alarm control button
?.Smart lights switch
8.Battery cover
Insert the battery and starts the alarm clock
Open the battery cover (8)
According to the lower part of the battery slot indicates batt 7 the right into the three AAA
Take care not to mix old and new batteries
Time setting
Press the function button (5) to the time setting position
Adjustable button press transfer I month (1) required to the set time, special attention to the PM and AM time, when is set to PM
After a time, PM "will be displayed
According to the tone I daily button I temperature knob (2) to the desired setting minutes
Set will function selection button (5) is allocated to the locked position.
Alarm settings
Press the function button (5) to the alarm location
Adjustable button press transfer I month (1) required to the set time, special attention to the PM and AM time, when is set to PM
After a time, PM "will be displayed
According to the tone I daily button I temperature knob(2) to the desired setting minutes
Set will function selection button (5) is allocated to the locked position.
Set date I temperature conversion
Press the function button (5) to the time setting position
According to the transfer I conversion button (4) to theempty set year
Adjustable button press transfer I month (1) required toset the month
According to the tone I daily button I temperature knob(2) required to set the date
Set will function selection button (5) is allocated to the locked position.
According to the tone I day I temperature knob,temperature and degree of Chinese type conversion functions
12/24 hour display settings
Toggle function selection button (5) to the time settingposition
Press the transfer I conversion button (4),can be realized 12/24 hour display conversion
As to the 24 hour show,a small "24" mark will appear in the upper left corner
Set will function selection button (5) is allocated to the locked position.
The alarm switch state setting
The alarm control stick (6) to the open position, an alarmsymbol will appear,
when reaching the alarm time pointalarm will, Lasts 60 seconds
The alarm control button (6) to the off position alarmsetting will cancel
Snooze and lighting function
When the alarm sound is ringing,press the sleep /Lighting button (3),the alarm sound will stop after
5 minutes again,
At the same time background exhibit of lanterns lit,Lighting button (3) background lights will be lit at any time according to snooze I
Light induction control function
The induction button (7) to the open position,
the alarmwill automatically according to the strength of environmental light to open background light
The light effect, if the externalenvironment of weak light,background light will open, otherwise will not open
selec the button pushing induction (7) to the off positionwill turn off this feature.
Maintenance and storage
When the alarm clock when not in use, please do notinstall the battery and the original packing box. A piece of cloth or paper towel to clean the alarm clockcan be soft,
do not use corrosive or cleaning agent hasthe chemical composition of the cleaning.
Keep the alarm clock to clean and dry, to avoid any problems
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
