木材殺蟲劑
MJB-FS型木材殺蟲劑是我司和德國KMHT公司共同研發的新型水載型防殺於一體的木材蟲害防護劑。該產品不含砷、鉻、銅和持久性有機污染物，符合國傢環保要求，處理後不改變木材的顏色。可有效滅殺食材性昆蟲和食菌性昆蟲，其活性物可長期吸附在木材細胞壁內，對木材具有很強的防蟲，防蛀，殺蟲卵之防殺於一體之強大功效。
一、適用范圍:
主要適用於各種原木，板材，半成品，成品木地板，木地板龍骨、木製品傢具，木製工藝品，竹製品，竹地板等蟲害滅殺、防護.
二、產品特點:
具有殺蟲范圍廣，瞬間超強滲透，抗流失性能好、註入木材固化後瞬間生成非溶性化合物，不易揮發、不易受雨水或土壤水份影響而流失、耐候性強、不影響油漆施工、不降低木材強度和絕緣性、提高阻燃性能等特點
三、使用方法：
操作之前首先清理乾凈木材表麵的附著物,然後選擇和水按1：10-50比例稀釋混合後.配置成10-2%的水溶液，進行塗刷.噴灑或浸泡處理
塗刷噴灑處理：以木材表麵充分吸收即（完全潤濕為標準）建議和水稀釋比例為1：10-30塗刷以1-2次為宜
浸泡處理：以水麵完全覆蓋木材為標準。建議和水稀釋比例為1：50-150浸泡處理時間12-24小時
四、註意事項：
1:操作時工作人員需穿戴防護工作服、手套和口罩
2:作業時不慎接觸到皮膚，應及時用清水沖洗乾凈
3:經處理的木材不宜作食品包裝箱用
4:操作和存放時應遠離兒童.用過的藥劑和廢料不要隨便丟棄.
5、有效使用期限：24個月
Wood pesticides
Mary j. blige - FS KMHT wood pesticides are our company and Germany company to develop new type of water carrying type anti killed in one of the timber pest protective agent. The product does not contain arsenic, chromium, copper, and persistent organic pollutants (pops), in line with national environmental requirements, after processing does not change the color of the wood. Can effectively kill ingredients sexual eat insects and bacteria insects, its long-term adsorption of active matter in wood cell wall, the wood has a strong insect-resistant, moth-proofing, kill the eggs of the killed in one of the powerful effect.
A, scope of application:
Is mainly suitable for all kinds of logs, plank, semi-finished products, finished product wood floor, wood keel, wood furniture, wooden handicrafts, bamboo products, bamboo flooring, protective pests such as culling.
Second, the product features:
Has a wide scope of insecticidal, instant super penetration, good erosion resistance, instantly generate insoluble compounds into the wood after curing, less volatile, not easily affected by rain or the soil moisture lost paint, strong weatherability, does not affect the construction, reduce the strength of wood and insulation, improve the flame retardant performance, etc
Method of use:
Clean up the first attachments on the surface of the wood before operation, and then selec and water in proportion of 1:10-50 diluted mixed. Configured to 10-2% of the aqueous solution, besmear brushs. Spraying or soaking process
Wood surface coating spraying process, fully absorb the (fully wetting as standard) advice and water dilution ratio of 1:10-30 besmear to brush with 1-2 second advisable
Soaking treatment: on the basis of the water completely cover lumber. Suggestions and soaking water dilution ratio is 1:50-150 processing time is 12-24 hours
Four, matters needing attention:
1: the operating personnel should wear protective overalls, gloves and masks
2: a job when he comes into contact with the skin, should be timely and rinse off with clear water
3: the treated timber is unfavorable for food packing
4: operation and storage should be far away from children. When the used reagents and don't throw away waste.
5, effective life: 24 months
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
