| PRODUCT FEATURES | |
| • Support testing on 802.11ac, 802.11/a/b/g/n standards | |
| • Support 120MHz VSA measurement B/W (16-bit 160MSPS ADC) | |
| • Support automated mass-production turnkey software | |
| • Easy-to-use GUI application for RD/QA purpose | |
| • PC open system architecture with VSA/VSG all-in-one-box | |
| • Signal measurement engine resides at the tester side | |
| • Capable of customer generated I/Q waveform file transmission | |
| MP5000 General Technical Specifications RF Analyzer(Note: 1) | |
| Parameter | Specifications |
| Input Frequency Range | 2150~2600 MHz, 4900~6000 MHz |
| RF Port number | 2 Ports |
| IF bandwidth | 120 MHz |
| Max input power | +30 dBm peak，+20 dBm average |
| Input power accuracy @(+20 to -75 dBm) | +/-0.75 dB (+/-0.5 dB Typ) +/-1.0 dB@ 0 ℃ ~ 50 ℃ |
| Phase Noise | Phase noise < -100dBc: 1 KHz offset @2.4 GHz Phase noise < -9 5dBc: 1 KHz offset @5.8 GHz |
| LO Leakage (after self-c alibration) | <-50 dBc |
| sideband image (IQ-imbalance) @after self-calibration | <-50dBc @ 2.4GHz, -10dBm < -50dBc @ 5.8GHz, -10dBm |
| Third order input inter-modulation distortion(IMD3) | < -70dBc@-10 dBm |
| Input Return loss | > 10 dB 2150~2600 MH z > 12 dB 4900~6000 MH z |
| ADC resolution | 16 Bits |
| Sample rate | 160 MS/s |
| Initial achievable accuracy | +/-50 ppb maximum (OCXO) @25 ℃, after 60 minutes warm up |
| Temperature stability | +/-20 ppb maximum(OCXO) @0 ℃ ~ 50 ℃ |
| Aging | +/-1 ppb / day maximum (OCXO) +/-100 ppb / yr maximum (OCXO) |
| Operating Temperature | 0 ℃ to 50 ℃ |
| Operating Voltage | 100 V to 240 V |
| Warm - up time | > 30 minute |
| RF Generator(Note:1) | |
| Parameter | Specifications |
| Output Frequency Range | 4900~6000 MHz，2150~2600 MHz |
| IF bandwidth | 120 MHz |
| Max Output power@ CW | +10 dBm @ 2150~2600 MHz +7 dBm @ 4900 ~ 6000 MHz |
| Power Accuracy@(0 to -95 dBm) | +/-0.75 dB (+/- 0.5 dB Typ ) +/-1.0 dB @ 0 ℃ ~ 50 ℃ |
| Phase Noise | Phase noise < -100 dBc: 1 KHz offset @ 2.4 GHz Phase noise < -95 dBc: 1 KHz offset @ 5.8 GHz |
| LO leakage(DC offset) @after self-calibration | < -50 dBc @ 2.4 GHz, -10 dB m < -50 dBc @ 5.8 GHz, -10 dB m |
| sideband image (IQ-imbalance) @after self-calibration | < -50 dBc @ 2.4 GHz, -10 dB m < -50 dBc @ 5.8 GHz, -10 dB m |
| Third order inter -modulation distortion(IMD3) | <-60dBc@-10dBm(two -13dBm Tone) |
| Return loss | > 10 dB 2150 ~ 2600 M Hz > 12 dB 4900 ~ 6000 M Hz |
| DAC resolution | 16 Bits |
| Sample rate | 960 MS/s |
| Initial achievable accurac y | +/- 50 ppb maximum (OCXO) @ 25 ℃, after 60 minutes warm up |
| Temperature stability | +/- 20 ppb maximum (OCXO) @ 0 ℃ ~ 50 ℃ |
| Aging | +/-1 ppb / day maximum (OCXO) +/-100 ppb / yr maximum (OCXO) |
| Operating Temperature | 0 ℃ to 50 ℃ |
| Operating Voltage | 100 V to 240 V |
| Warm-up time | > 30 minute |
新手教學
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
