深宏遠環保空調的特點：

1.  節能：環保空調的運行費用是傳統壓縮機空調的1/8，耗電量為每小時約一度。

2.  環保：無化學氟利昂冷媒，完全靠水製冷的環保型產品。

3.  空氣清新：室外新鮮空氣經過過濾進入室內，無須密閉,故無傳統空調帶來的不適應感。

4.  降溫明顯：在珠三角較潮濕的地區，一般能達到5-10℃的降溫效果，在特別炎熱乾燥（如北方）地區，可降溫8-15℃。

5.  噪音低：環保空調振動小，風量強勁，噪音低，工作環境安靜舒適。

6.  智能控製：定時開機、定時關機、定時自動清洗功能，真正實現無人操作，自動運行。

深宏遠環保空調的降溫原理：

    靠近江河、海洋的地方都很涼爽，這是因為當熱空氣吹過水麵時，水分子吸收熱空氣的熱量而蒸發，從而使水麵上的空氣熱量降低，溫度下降，所以才感到涼爽。深宏遠環保空調就是根據這一自然現象，利用循環水泵，不間斷的把水箱內的水抽出，均勻地噴淋在蒸發過濾層上，室外熱空氣通過濕濂網時，與水分子充分進行熱量交換，使水分子蒸發吸熱而達到降溫效果。

深宏遠六葉負壓風機的特點：

Shen hong yuan Six of the suction ventilators features:

一、   風扇葉片與多V皮帶輪組的平衡校正由專業技術人員負責。采用國外先進技術電腦平衡校正機器，等級達4級水準（G6.3），符合ISO1940鋼性運轉體技術,達國際品質要求。

1, fan blades and multi-V pulley group balance correction by professional technical staff. Use of advanced technology from abroad balance correction computer equipment, the standard grade of 4 (G6.3) and with the operation of the ISO1940 steel technologies to international quality requirements.

二、   本機所匹配的1HP馬達采用全鋁合金外殼，密封嚴、抽風效能好、耗電量少、每小時隻須0.75度電力。

2. This machine-match 1HP All motors used aluminum alloy shell, Seal strict,Good ventilation efficiency, Less power consumption, only 0.75 per hour of electricity.

三、   傳動皮帶采用PK多V皮帶,耐磨損,運轉時無傳統皮帶打滑及噪音的困擾。

3.more transmission belt use PK V belts, wear resistance, When running the not traditional belt slipping and noise nuisance.

四、   百葉窗的設計運用空氣順流原理,不需要使用電力及人員開關,美觀大方,且可以防雨水侵入。

4. Louver air downstream use of the design principles, Do not use electricity and personnel switch, handsome generous, and can prevent water intrusion.

五、   主體外框采用FRP材質,可減少金屬共鳴,且抗酸堿,防腐蝕,增加使用年限。(可連續使用10-20年)

5. FRP materials by the main frame, metal resonance can be reduced ,And resistance

Acid-base,anti-corrosion, and increase life span. (Continuous use for 10-20 years).

深宏遠負壓風機的降溫原理：

Shen hong yuan the suction ventilators coolingPrinciple:

負壓風機是利用空氣對流、負壓換氣的降溫原理，由安裝地點的對向---大門或窗戶自然吸入新鮮空氣,將室內悶熱氣體迅速，強製排出室外,任何通風不良問題均可改善,降溫換氣效果可達90%-97%。

suction ventilators Is to use air convection cooling principle of negative pressure ventilation, by the location of the installation of the doors or windows - to the natural inhalation of fresh air, indoor hot gas rapidly, from the mandatory outdoor, Any adverse problems can be improved ventilation, Ventilation cooling effect of up to 90% -97%.

EVAPORATIVE COOLING

(夏天在編織，洗染，生產&加工服裝工廠等很容易達到40度用這種風機很容易降下7－12度。)

Temperature can easily exceed 40℃in spining,knitting,dyeing,finishing & garments factory during the summer if they are not equipped with cooling system.Such high temperature reduces product quality & worker productivity.Evaporative cooling is the most common method for reducing the temperature inside a factory.Air conditioning or refrigeratuib systems can be used,but their installation and operation costs are usually prohibitive.

Evaporative cooling is a process that reduces the temperature 7-12℃of air by the evaporation of water into the airstreams.As water is evaporated,energy is lost from the air reducing its temperature.Reduced temperature enters in to room and room become cool.

EVAPORATIVE COOLING PAD AND EXHAUST FAN SYSTEM

A Pad-and-Fan cooling system typically consists of axial flow