ZX-220全自動電腦剝線機(細線高速型)
SW-220 Full-automatic Microcomputer-based Peeling Wire Machine (Thin Wire High-speed Type)
特點Features
● 大型液晶體顯示屏，全漢字圓形顯示，操作簡單，避免設定錯誤，造成線材損耗，本機具有40組設定資料內存，常用的線材加工尺寸參數，不必重復設定，調整線長 50mm 以下之短線亦可做前後端半剝功能。總長100mm兩端剝皮10mm的裁線，均可達8500條/小時的產能。
● It has large LCD and round full-Chinese character display, with simple operation, it can avoid the error of setup and loss of wire, the machine has 40 groups of setting material memory. By using this machine, the processing dimension parameters of usual wires may not be set again, and the short line of 50mm long below may be processed by making the half peeling at the fore and rear end.It has the productivity of 8,500pieces/hours for the cutting wire of 100mm long that is stripped 10mm from two ends.
技術參數Technical parameters
| 型號 Model | ZX-220 |
| 切割長度 Cutting length | 0.1~9999.9mm |
| 剝線長度 Stripping length | 0.1~30mm(具體依線材而定Determinedbythespecific wire) |
| 切斷誤差 Cut error | ±(0.2+0.002XL)mm |
| 剝線范圍 Wire peeling range | AWG#16-32 |
| 電源 Power | AC220V±10% 50/60Hz |
| 外形尺寸 Dimensions | 460mmX450mmX360mm |
| 重量 Weight | 38kg |
說明：特殊種類，超規格線材不能加工。
Note: The special variety and super-specification wire can’t be processed.
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
