用途：有一個或一個以上電路接線可插入的座，通過它可插入各種接線，便於與其他電路接通適用行業：適用於：電視機,LCP,PDP,電腦,筆記本,手機,傢電,視聽,影視等領域.
簡單描述：與插入式元器件(如插頭、電子管、繼電器等)相配接的連接器技術指標：使用溫度范圍 -30-70℃ 耐壓 AC500V(50Hz)/min額定負荷 DC 30V 1A 動作力 5~30N接觸電阻 ≤0.03Ω 壽命 5000次絕緣電阻 ≥100MΩ
1. Rating額定值: | AC 250V 10A | |||
2.Operation temperature range使用溫度範圍: | -20℃~+70℃ | |||
3.Preservative temperature range保存溫度範圍: | -25℃~+80℃ | |||
4. Construction dimension結構尺寸: | Apply to the appended drawing:符合附加圖紙 | |||
Item項目 | Test condition測試條件 | |||
5.Electrical characteristics電氣性能 | ||||
5A | Contact Resistance 接觸阻抗 | Being measured at 1KHz small current contact resistance meter. 在1KHZ小電流下測量. | ||
5B | Insulation Resistance 絕緣阻抗 | Measurements shall be made following application of DC500V potential across terminals and across terminals and frame for 1 minute. 在端子之間和端子與殼之間加DC500V條件下,持續1分鐘測量. | ||
5C | Withstand Voltage 耐電壓 | AC1500V (50Hz or 60Hz) shall be applied across terminals and across terminals and frame for one minute. 在端子之間和端子與殼之間加AC1500V(50HZ或60HZ)條件下,持續1分鐘測量. | ||
6. Mechanical characteristics機械性能 | ||||
6A | Insertion and Extraction force 插拔力 | Being measure at across spring piece and across matching plug for ergometer. 用測力計在插頭與彈片之間進行測量. | ||
6B | Terminal Strength 端子強度 | A static force of500gfbeing applied in one direction on the tip of terminal for 1minute. 將500克之靜負荷施加於端子頂部的一個方向持續1分鐘。 | ||
7. Durability耐久性 | ||||
7A | Soldering test 可焊性試驗 | The tip of the terminals shall be dipped 2mm in the solder bath at a temperature of 240±5℃for 3±0.5sec. 端子頂部被浸入焊錫池2mm深,溫度240±5℃,時間3±0.5秒。 | ||
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
