本公司粉碎機分三種刀具型式
1． 片刀型，適於粉碎水口料，壁厚不超過5mm的不良品等
2． 爪刀型，適於壁厚超過5mm的不良品，試模產生的厚膠頭等
3． 星型：適於薄膜類邊解料的粉碎
§產品特點
1、鋼結構箱體，鑄鋼刀架，優質工具鋼刀具，高強度鋼螺絲緊固堅實耐用。
2、活動式篩網，拆裝方便，易於清洗換色。
3、機箱前後設隔音夾層，降低噪音對環境之影響。
4、階梯式刀具，碎料效率快：“爪式”刀具降低剪切力，提高破碎能力。特別適用於尼，工程塑膠等又硬又韌之塑料。
5、馬達附有過負荷保護裝置，並有電源連鎖保護系統，操作，清洗絕對安全。
6、碎料室後設置雙層密封裝置，刀體配合緊密，防止粉料泄入軸承座內而加重電機負載
1.Piece knife type, suitable for crushing materials outlet, wall thickness of not more than 5mm of defective products, etc.
2.Claw knife type, suitable for wall thickness more than 5mm of defective products, test mode are thick plastic top
3.Star: suitable for film class edge to crush material
§ Features
1, steel box, steel knife, high quality tool steel cutting tools, high-strength steel screws fastening a solid and durable.
2, movable screen, easy disassembly, easy to clean for color.
3, chassis set up noise before and after dissection, reduce noise impacts on the environment.
4, ladder-type knife, scrap the efficiency of fast: "claw" tool lower shear force, increase crushing capacity.Particularly applicable to Nepal, works hard and tough plastic of plastic.
5, motor equipped with overload protection device, and a power interlock protection system, operation, cleaning is absolutely safe.
產品規格若有變更，恕不另行通知。
註：
1）"○"為選購件。
2）"-A"為爪刀型結構粉碎機，"-B"為平刀型結構粉碎機。
3）最大粉碎量取決於篩網孔徑和粉碎材料等因素。
4）粉碎時噪音因粉碎材料不同而各異。
5）機器電壓規格為3φ 380V 50Hz
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
