商品代碼:4052828

  • 現在位置: 首頁 » 貨源 » 機械設備 » 密封件 » U型密封件 »
    供應英國JamesWalker密封件-FS密封件
    商品代碼: 4052828
    (可點擊以下立即詢價直接線上諮詢,或來電提供此商品代碼諮詢)
    即日起提供日本樂天代購服務-詳見 Rakuten-suki日本樂天代購,謝謝。
    商品詳細說明

    英國JamesWalker密封件國產化介紹

    Product selection: FS Casing & Tubing Seal(國內稱FS密封)

    (國內稱S密封)

    我司通過長時間研制,已成功加工出這兩種類形產品,已有大量產品用於石油行業,已完全能代替進口產品。本產品質量上可優於同類進口產品,並價格,供貨時間上有巨大優勢。

    FS Casing & Tubing Seal

     

    Description
    Our FS Casing & Tubing Seal has been specially developed to undertake arduous fluid sealing duties wher there are large clearances between mating parts of wellhead and associated assemblies.
    It has been tested in accordance with API requirements for use on surface wellhead-to-casing systems, wher the seal can readily replac metal end cap and plastic pack sealing arrangements. 
    Special features
    The combination of design, materials and construction ensures that high-performance FS Casing & Tubing Seals retain their sealing integrity under adverse operating conditions, including:

     

    • Stab-in operations.
    • Wide ranges of temperature and pressure.
    • Chemically aggressive and highly asbrasive oilfield media.

     

    Operating conditions to API requirements
    The FS Casing & Tubing Seal has undergone DNV witnessed tests on rough casings in accordance with API 6A, Appendix F, PR2 procedures. It is suitable for:

     

    • Maximum operating pressure: 69MPa (10,000psi).
    • Operating temperature range: -29°C to +177°C (-20°F to +350°F).

     

    Construction
    The seal is precision moulded in rapid gas decompression (RGD) resistant hydrogenated nitrile HNBR elastomers. Anti-extrusion capability is provided by two toroidal springs mould-bonded into the outer edges of the primary sealing face.

    Materials selection
    HNBR elastomers:Elast-O-Lion® 101 or Elast-O-Lion® 985. Both these grades are well proven for their toughness, wear resistance, rapid gas decompression (RGD) resistance, and broad temperature capability.

    Elast-O-Lion® 101 is our premier RGD resistant hydrogenated nitrile grade. Elast-O-Lion® 985 is proven for use in very low temperature applications whilst exhibiting good RGD resistance.

    Toroidal springs (anti-extrusion): standard material is stainless steel to BS EN 10270-3-1.4401 (formerly Grade 316 S42). Nickel-based Alloy 600 - UNS N06600, is also available.

    Installation
    FS Casing & Tubing Seals are system pressure energised, and designed to accommodate the OD tolerances and surface finish of API 5CT casing and tubing. The stab-in end of the casing needs needs just simple hand-ground chamfer preparation before insertion.

    The flexibility of the seal, combined with the benefits of securely mould-bonded springs, helps to simplify the fitting operation and ensure correct location in housings.

    FS Casing & Tubing Seals can be retrofitted to many conventional P-seal housings with minor modifications to the ports. The seals offer reductions in installation time without the need for separate pack-off operations.


     

     

     



    新手教學
    供應英國JamesWalker密封件-FS密封件_U型密封件_密封件_機械設備_貨源_批發一路發
    批發市場僅提供代購諮詢服務,商品內容為廠商自行維護,若有發現不實、不合適或不正確內容,再請告知我們,查實即會請廠商修改或立即下架,謝謝。
    相關商品
    line 線上客服  ID@tsq1489i
    線上客服