HW-SB薄膜鎖邊機HW-SB Edge Fixing Machine Of Film  用途 Usage 
本機用於流延膜生產線上薄膜的定邊，使驟冷輥上的薄膜寬度鎖定在一定的范圍之內。
 
The machine is used on production line of films that can fix edge of film on roller within in certain range.  工作原理 Working Principles 
薄膜鎖邊機工作時能產生高壓直流電，利用高壓直流電來擊穿薄膜周圍的空氣，形成離子流和靜電子場，然後使薄膜吸附於驟冷輥上，阻止薄膜因冷卻而產生寬幅收縮，確保薄膜的寬度符合要求。
The machine can output high pressure direct current when it is working. The direct current can be used to breakdown air surrounding the film and form ion beam and static electron field. So that the film will be adsorbed on rollers without shrink in big range. The machine will guarantee width of the film produced to be controlled according to standard.  性能特點 Performance＆Specialty 
1，體積小，安裝方便，操作簡單，
2，輸出電壓0-20KVDC，功率大小可以按流延膜生產線的速度隨時可調。
3，性能穩定，安全可靠，定邊效果好。
 
1 The machine is of small cubage, and is easily to be installed and operated.
2 Output voltage of the machine is 0-20KVDC,which can be adjusted according to speed of the production line at any time.
3 The machine is stable, safe and of good edge fixing quality.  使用方法 Usage Method 
1，確認高壓輸出正負端，將高壓輸出負端與薄膜生產線的驟冷輥相連，高壓輸出正端連接到放電針。
2，放電針端頭部分與驟冷輥輥麵垂直，並保持0.8CM左右的間距，
3，將電位器反時針方向旋轉到底，插上電源，打開電源開關，順時針逐漸旋轉電位器，使薄膜鎖定與驟冷輥，達到寬度要求，此時鎖定針應輕微放電。
 
1 First to affirm positive and negative terminal of output high pressure current, and connect the negative terminal with roller of the production line. Positive terminal shall be connected with spray point
2 Head of spray point shall be vertical to surface of roller. There shall be a 0.8cm distance between spray point head and roller.
3 Turn potentiometer to the end in counter-clockwise direction and plug In the power. Open switch of power, turn the potentiometer in clockwise direction slowly and fix the film on roller within its standard width. The locking pin can discharge power sligh

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。