代理/日本旭硝子/ETFE/C-88AXP/價格最新/批發供應/物性SGS_特種塑料_橡塑_貨源

廠傢(產地)：日本旭硝子

牌號：ETFE C-88AXP

用途級別：薄膜級

日本旭硝子 ETFE C-88AXP 最新物性認證數據表

由中特塑料免費提供財富熱線：13751354469

Main uses of Fluon_®ETFE

Extrusion	electrical cables	films
	tubes	filament
Injection moulding	casing	moulded parts
Powder coating or Lining

Good Mouldability

With the characteristics of fluoropolymers, extrusion, injection molding and powder coating are available, as with general thermoplastic resins. Filming, heat-sealing, composition with rubber and various secondary processes are possible.

Good Performance Over a Wide Temperature Range

Stable mechanical electrical properties are maintained over a wide range of temperatures, -200 - +180°C. Continuous service at 150°C is possible.

Excellent Chemical Resistance

Almost all chemicals, from hard acids and hard bases down, will not affect the properties of Fluon_®ETFE.

Exceptionally Good Electrical Properties

Fluon_®ETFE is an excellent insulator and has a high break-down voltage with thin film. A low dielectric constant dielectric tangent would be evident over a wide range of frequencies.

Nonflammable, Non-poisonous

Flammability: UL-94V-0. Tasteless, odourless, non-poisonous and suitable for almost any purpose.

Good weatherability beyond 10 years

Screens ultraviolet-rays (UV) and does not deteriorate as a result of contact with UV.

Excellent Low Surface Energy

Good surface properties, e.g. low friction constant, anti-adhesion and water/oil repellency give the lowest of flow resistance.

Fluon_®ETFE Properties

Item	Unit	Method	Fluon_®ETFE	ECTFE	PVdF	FEP	Fluon_®PTFE
Mechanical properties
Specific gravity	-	ASTM D792	1.74	1.69	1.77	2.16	2.1
Melt velocity	Pa·s	-	10³		10³	10³	-
Tensile strength	MPa	ASTM D638	48	41	55	20	22
Tensile elongation	%	ASTM D638	430	250	250	280	380
Tensile modulus	MPa	ASTM D638	800	1650	970	350	400
Flex modulus	MPa	ASTM D790	900	670	1550	610	520
Izod impact	J/m	ASTM D256	non- breakable	non- breakable	250	non- breakable	160
Rockwell hardness	-	ASTM D785	50	93	110	25	18
Durometer D hardness	-	ASTM D785	67	-	-	55	58
Friction coefficient	-	-	0.20	-	0.21	0.20	0.09
Thermal Properties
Melting point	°C	-	260	245	180	290	327
Linear thermal expansion coefficient	10^-5/°C	ASTM D696	9.4		12.8	10.5	10.0
Flammability	-	UL-94	V-0	V-0	V-0	V-0	V-0
Continuous service temperature	°C	2)	150	150	150	200	260
Chemical Properties
Water absorption	%	ASTM D570	0.03	0.01	0.05	0.01	0.01
Chemical resistance	-	ASTM D543	excellent	good	good	excellent	excellent
Gas permeation³⁾	3)	ASTM D1434
- O₂			3.1		1.8	12	21
- N₂			1.0		0.1	3.2	7.9
Electrical Properties
Volume specific resistance	(V·cm)/A	ASTM D257	10¹⁷	10¹⁸	2*10¹⁴	10¹⁸	10¹⁸
Dielectric constant	-	ASTM D150	2.6	2.6	6.4	2.1	2.1
Dielectric tangent	-	ASTM D150
60Hz			0.0006	0.0006	0.05	0.0003	0.0001>
1kHz			0.0008	0.0015	0.018	0.0002	0.0001>
1MHz			0.005	0.015	0.16	0.0007	0.0001>
Break-down voltage	kV/0.1mm	ASTM D149	12	12	9	12	9
Arc resistance	s	ASTM D495	120	18	60	165	300

1):0.69Mpa, 3m/min, against stainless steel
2):Reduced to half after 100,000 hours
3):10^-16mol·m/(s·m2·Pa)

代理/日本旭硝子/ETFE/C-88AXP/價格最新/批發供應/物性SGS

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。