鑄鋁加熱器

Casting-Aluminum Heating Device

鑄鋁加熱器以管狀電熱元件為發熱體。彎曲變成所需造形後，進入模具以離心澆鑄方式，形成各種形狀再經過精密加工得到所需尺寸，它能和被加熱體緊密咬合，起到升溫快、加熱均勻，導熱性能好，壽命長抗污染，安全可靠等特點。

Casting-aluminum heating device uses tubular electric heating component as heating material.After changing into desired shape,it entered molds to be casted into various shapes in a centrifugal way, then was conducted accurately to needed size and be put together with what is need to heat tightly.So it is easy to heat equably and longlive and safe and can withstand pollution

鑄銅加熱器

Casting-Copper Heating Device

鑄鋁鑄銅加熱器是一種高效熱分部均勻的加熱器，熱導性的鋁銅合金，確保熱麵溫度均勻，消除瞭設備的熱點及冷點，將外散熱麵增加保溫裝置，內散熱麵燒結紅外線這樣可節約用電35%。鋁工作溫度400 -500℃，銅工作溫度600 -700℃。

Casting-aluminum and casting-copper heating device is high effective. Aluminum and copper alloy can ensure radiate equably and eliminate the hot point and cold point, add heat presser-vation device to outside radiator surface. Inside radiator surface ore-sintering infrared rays, thus 35% energy was saved. Aluminum can work normally at 400 to 500℃, copper at 600 to 700℃.

鑄鋁鑄銅加熱板

簡要說明：鑄鋁，銅電加熱元件是對於單位表麵負荷要求較高的電加熱元件，鑄鋁，銅電加熱元件，完全按用戶的使用規格、幾何形狀及尺寸澆鑄。鑄鋁類加熱板、加熱圈、表麵負荷可達3-4 W/cm2，最高使用溫度可達400℃。鑄銅類加熱板、加熱圈、表麵負荷可達6-7 W/cm2，最高使用溫度可達700℃

Casting-aluminum and casting-copper heating plate

鑄鋁銅加熱器，加熱器板，加熱圈，電熱板

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。