我司專業提供TE Connectivity G Model 端子壓接機器,可以加裝壓接質量監控器,實時在線監控功能. 如有需要請聯系: 林機先生+86-13510815376 // +852-69154917l[email protected]
Product Facts
n Quieter
n Improved guarding and
lighting
n Toolless changeover of
applicators
n Precision manual- or autoadjust
for crimp height
n Total and batch counter
n Accepts all existing Tyco
Electronics miniature
applicators, with minor
modifications
n Reduced maintenance
requirements
n Split-cycle operation for
both lead-making and
bench-top use
n Standardized 15/8 [41.3]
stroke
n Cannot be operated during
normal production with
guards open
n Operates on either 120 or
220 VAC, 50 or 60 Hz
n Available with CQM
G-Adapter for crimp quality
monitoring using miniature
applicators
n Produced under a Quality
Management System certified
to ISO 9001
The Model “G”
is the most
advanced design
in the long-standing
series of
AMP-O-LECTRIC machines
for terminating wire using
reeled terminals and contacts.
It features a reliable
direct motor drive system.
Its modular construction
also enables us to provide
versions for use either as
bench-top units, or in combination
with fully-automatic
lead-making equipment.
For operator convenience,
we’ve improved access to,
and lighting in the target
area, and moved the Crimp
Quality Monitor (CQM) to
eye level for bench-top use.
The Model “G” is also quieter,
plus improved guarding
meets applicable
European and domestic
safety requirements.
All Model “G” versions
include precision adjustment
for crimp height — an
important feature, which, in
combination with the optional
CQM, will enable you to
maintain the tight tolerances
required for today’s
demands for higher levels
of quality. By simply resetting
a dial, an operator can
adjust crimp height in .0005
[0.013] increments over a
.018 [0.457] range. When
used with CQM, automatic
adjustment is also available.
Another user-friendly feature
is its control system. At
the push of a button, you
can power the motor on or
off, jog forward or reverse,
switch to split-cycle operation,
turn the work light off
or on, power the air feed on
or off, or reset the batch
counter. And, it’s all reported
on an LCD display. The
controls will also detect and
report errors in the
machine, and stop cycling
when a bad crimp is detected
by the CQM. The operator
must then push the reset
button to continue.
The Model “G” will
accept all existing Tyco
Electronics miniature
applicators, with minor
modifications. See
Applicator Instructions 408-
8053, Conversion Guide for
Tyco Electronics Miniature
Quick-Change Applicators,
for details.
Most of our existing applicators
may be used for
crimp quality monitoring on
versions equipped with
CQM and CQM G-Adapter.
To use CQM for Tab-Lok
FASTON flag terminals, a
CQM hinge-bar applicator
is required. You can’t use
CQM to monitor the application
of closed-barrel preinsulated
terminals.
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
