| ITEM | UNIT | VT-10 | VT-10T |
| CAPACITY |
| Swing over z way cover | mm | 360 | 360 |
| Max. turning diameter | mm | 280 | 280 |
| Swing over cross slide | mm | 200 | 200 |
| Max. turning length | mm | 200 | 200 |
| Slideway slant angle | degree | 15 | 15 |
| TRAVEL |
| X-axis travel | mm | 250 | 250 |
| Z-axis travel | mm | 250 | 250 |
| Y-axis travel | mm | --- | --- |
| W-axis travel | mm | --- | --- |
| SPINDLE |
| Type of spindle nose | ISO | A2-5 | A2-5 |
| Chuck diameter & type | mm | 6", F48, 16C | 6", F48, 16C |
| Spindle bearing inner diameter | mm | ∮ 75 | ∮ 75 |
| Through spindle hole diameter | mm | ∮ 52 | ∮ 52 |
| Spindle drive motor(cont/30min) | HP | 10 | 10 |
| Spindle speed range | rpm | 4000(5000) | 4000(5000) |
| Sub-spindle drive motor(cont/30min) | HP | --- | --- |
| Through sub-spindle hole diameter | mm | --- | --- |
| Through bar capacity | mm | ∮ 42 | ∮ 42 |
| HYDRAULIC |
| Number of tool stations | | --- | 8 |
| Turret type | | --- | --- |
| Turret indexing time | sec | --- | 0.4 |
| Shank height of square tool | mm | 16 | 16 |
| Shank diameter for boring bar | mm | ∮ 20 | ∮ 20 |
| FEEDRATE |
| Rapid traverse rate x-axis | m/min | 15 | 15 |
| Rapid traverse rate z-axis | m/min | 15 | 15 |
| Rapid traverse rate y-axis | m/min | --- | --- |
| Rapid traverse rate w-axis | m/min | --- | --- |
| Ballscrew diameter of x-axis | mm | ∮ 25*P5 | ∮ 25*P5 |
| Ballscrew diameter of z-axis | mm | ∮ 25*P5 | ∮ 25*P5 |
| Ballscrew diameter of y-axis | mm | --- | --- |
| Ballscrew diameter of w-axis | mm | --- | --- |
| TAILSTOCK |
| Tailstock travel | mm | --- | --- |
| Tailstock spindle diameter | mm | --- | --- |
| Tailstock spindle travel | mm | --- | --- |
| Taper hole of tailstock spindle | | --- | --- |
| REMARKS |
| Coolant pump motor | HP | 1/4 | 1/4 |
| Coolant tank capacity | Liter | 160 | 160 |
| Floor space | mm | 2500*2500 | 2500*2500 |
| Machine weight | kg | 1700 | 1800 |
