Name ：Thermostream
Model：ATS-710
Brand ：Temptronic
Advantage：ATS-710and ATS-545has wide range of temperature，from -80℃ ~ +225℃；control temperature accurately，minimal temperature display is 0.1℃，temperature Residual is ±1℃；
System Performance:
- Airflow: High capacity 9 l/s (18 scfm) continuous airflow optimizes temperature transition rate and throughput.
- Typical Temperature transition rate:
-55° to +125°C: approximately 7 seconds
+125° to -55°C: approximately 20 seconds - Temperature Control: Air or Patented DUT Dual Loop directly at the DUT case to ±0.1°C
- DUT Sensor Ports: Four: Internal Diode, Type T or Type K thermocouple, and 100 ohm RTD
- Temperature set, display and resolution: ±0.1°C
- Temperature Accuracy: 1.0°C ( calibrated to NIST standard)
- Remote interface ports: Four: IEEE-488, RS232C, SOT/EOT/SFF, Ethernet.
*Note 1: Due to the use of HCFC-free refrigerants with 50 Hz systems, the ultimate low temperature capacity of 50 Hz systems will be up to 5&C warmer than 60 Hz systems.
Operating Features:
- User Control at Color Touch-screen at front panel or via remote interface
- Two modes of operation:
- Operator Mode: Test and cycle at Hot/Ambient/Cold temperatures
- Cycling Mode: Utilize up to 18 thermal cycling sequences, graphing, datalogging, and other advanced features.
- User-defined "At Temperature" Windows, airflow rate, Air or DUT Temperature Control
- Thermal head raising and lowering: Pneumatic control; also manually adjustable
- Arm/manipulator movement: manual locking, Rotates 330 degrees around base for positioning; extends to 139cm (55 in.)
- Thermal Cycling Sequences: Set up to 18 cycling routines in sequence on one table.
- Hard drive or diskette storage of test set-up files for quick recall and test repeatability.
- documentation: Color graphing, Automated datalogging to hard disk and/or diskettes
- Peripheral ports for user-supplied printer, monitor, keyboard, and mouse
- CFC-free for all systems; HCFC-free for all 50 Hz Systems
- CE Approved and SEMI S2-93A compliant
Applications:
- Test and cycle a DUT under a variety of conditions, creating test sets of up to 18 cycling sequences. Graphing, datalogging and printer port features assist in documentation.
- For 24 hr/ 7 day test environments, the TP04300A's high capacity airflow and DUT thermal precision ensure high throughput with consistent repeatability. Operator's Mode ensures quick set-up for testing at up to three temperatures.
- Thermal source for applications requiring precisely controlled thermal air, including the ThermoFixture® enclosure/ATE interface for thermally testing PCB, modules, assemblies, digital, high frequency (RF, microwave), and high power devices.
Options & Accessories
Custom Thermal Test Enclosure (CTTE)
Custom Thermal Test Enclosures provide a frost-free environment for testing components, modules, small subassemblies, printed circuit boards and MCMs over the full -80° to +225°C temperature range. Patented probe-through windows permit the probing of the PCB or subassembly while it is held at precise temperature in the CTTE thermal environment, from -55°C to +125°C.
伯東企業有限公司是Temptronic 產品在大中華區的獨傢代理，擁有專業的銷售和服務隊伍，能為中國用戶提供優質的產品和全麵的技術服務!
公司名稱：伯東貿易(深圳)有限公司
聯系人：陳俊華(Daniel Chan)先生 /謝影(Samiya Xie)小姐
聯系電話：852-2512 5743 / 0755-2547 3927
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
