▲元麒靜電噴槍嘴 
YC—90臺灣元麒靜電噴槍嘴分為：1.白鐵噴嘴 口徑：22mm ；2.塑鋼圓噴嘴 口徑：12mm ；3.傘型噴嘴 口徑：3mm 。專利號產品，耐磨損高霧化；適合各類式高品質噴塗要求

▲技術參數：

塗料壓力1~1.5 kg/cm2，空氣壓力0.2~0.5MPA，出力電壓 40~60 KV

輸出電壓 DC-60KV，電流 DC-120uA，空氣消耗量  50～200L/min
空氣吐出量50～300ml/min ，噴塗距離0.35m，斷電電流 50 u A
外型尺寸300*120*350MM

材質：特制塑膠復合材料

整機重量：9KG     

臺灣元麒YC-90靜電液體噴槍與一般噴槍區別：

1、噴塗質量好：附帶靜電的塗料粒子，不僅正麵還從側麵及背麵包覆工作，有極好吸附能力，工件粗糙麵，死角位都能均勻地上漆，解決瞭手噴漆膜厚薄不均、色差問題。

2、降低油漆成本：靜電的出色吸附特性，使上漆率達到95% 以上，比一般手噴節省塗料 30% — 50% ，生產成本大大降低。 

3、 效率高：靜電噴塗時間短，塗層均勻，幾秒鐘便可達到 50 — 100um 。塗層厚度完全滿足客戶生產要求，配合流水線升降系統效率提高幾倍，同時節省人力資源。

產品介紹：
概述：元麒手動液體靜電噴槍，標準配備 包含空氣調壓閥、靜電主機、靜電噴槍及YC-90白鐵噴嘴壹組。（客戶可選擇塑鋼噴嘴或YC-90白鐵噴嘴）以上靜電噴槍再配合塗料輸送泵浦、塗料過濾器、塗料穩壓閥，即可構成壹套完整 液體靜電噴塗設備，油漆桶倒入塗料，即可開始噴塗作業。

用途：
汽車零件、五金制品、重工機械、傢電零件、鋼制傢具、木工產品、鍍金保護、控制盤、OA機械、微小零件、自行車、計算機機殼、 文具用品、木制傢具、傢電用品、工藝飾品、運動器材、鐵氟龍不沾鍋等

噴槍特點：
1、噴槍重量僅有470克，為世界上最輕的噴槍。
2、依人體工學設計，輕巧，好握，順手好操作。長時間作業，不容易覺得疲勞。
3、噴幅調整閥置於噴槍的左側，讓使用者好操作。
4、采用新型專利字號75875高霧化噴嘴，可提高生產力及滿足高品質塗裝表麵的要求。
5、撞針及閥座采用耐磨鎢鋼，可延長使用壽命。
6、槍身采用耐高壓電的材質。手把采用低阻抗的復合材料。槍身結構較一般設計長1公分，有效減少塗料回包現象。
7、安全電路設計，操作錯誤或發生異常電壓、電流時，電路保護系統會快速自動斷電、放電及蜂鳴器示警。提高操作安全性。
8、故障率低，維修零件便宜，維修更換零件簡單化。

============================================================

Authentic Taiwan Yuan Chi brand: Yuan Qi YC-90 electrostatic spray gun powder (liquid) special, mouth is divided into: 1 tin nozzle diameter: 22mm; 2 steel circular nozzle diameter: 12mm; 3 umbrella type nozzle diameter: 3mm
▲ yuan Qi electrostatic spray gun nozzle
YC - 90 Taiwan yuan Qi electrostatic spray gun nozzle is divided into: 1 the tin nozzle diameter: 22mm; 2 steel circular nozzle diameter: 12mm; 3 umbrella type nozzle diameter: 3mm. The number of the patent product, wear-resistant high atomization; suitable for all kinds of high quality coating requirements
▲ technical parameters:
Paint pressure 1~1.5 kg/cm2, air pressure of 0.2~0.5MPA, output voltage 40~60 KV
Output voltage DC-60KV, current DC-120uA, air consumption 50 ~ 200L/min
The air discharge rate of 50 ~ 300ml/min, the spraying distance 0.35m, off current of 50 u A
Dimension 300*120*350MM
Material: special plastic composite materials
Weight: 9KG
Taiwan yuan Qi YC-90 electrostatic spray gun and the general distinction between liquid spray gun:
1, good spraying quality: paint particles with electrostatic, not only the positive side and backside coating from work, has an excellent adsorption capacity, the rough surface, the dead are uniformly painted, the hand paint film is uneven, the color problem.
2, to reduce the cost: excellent adsorption properties of electrostatic painting, the rate of more than 95%, paint saving 30% - 50% than general hand spraying, greatly reduce the cost of production.
3, high efficiency: electrostatic spraying time is short, uniform coating, a few seconds can reach 50 - 100um. The thickness of the coating fully meet customer requirements of production, with the efficiency of pipeline lifting system is several times more, save manpower and resources.
Product introduction:
Summary: Yuanqi manual liquid electrostatic spray gun, standard equipment includes air pressure regulating valve, electrostatic host, electrostatic spray gun and YC-90 tin nozzle group. (customers can choose plastic nozzle or YC-90 tin nozzle) or electrostatic spray gun with paint, paint, paint conveying pump filter regulator, can form a complete set of liquid electrostatic spray equipment, paint bucket into the paint, you can start the spraying operation.
Use:
Auto parts, hardware products, heavy machinery, electrical appliances parts, steel furniture, wood products, gold-plated protection, control panel, OA machinery, small parts, bicycle, computer case, stationery, wooden furniture, electrical appliances, handicrafts, sports equipment, Teflon non stick pan, etc.
Spray characteristics:
1, gun weight only 470 grams, the world's light.
2, according to the human engineering design, lightweight, good grip, easy to operate. Long time operation, is not easy to feel fatigue.
3, spraying range adjustment valve is arranged in the gun on the left side, let the user operation.
4, the utility model patent number 75875 high atomizing nozzle, can improve the productivity and meet the requirements of high quality coating surface.
5, the striker and seat with wear-resistant steel, can extend the service life.
6, the body with high voltage electrical material. Hand made of composite materials with low impedance. The body structure is a general design length of 1 cm, effectively reduce the paint back phenomenon.
7, the safety circuit design, operational error or abnormal voltage, current, circuit protection system will fast automatic power-off, discharge and buzzer alarm. Improve operational safety.
8, low failure rate, repair parts, cheap, simple repair and replacement parts.