輥壓機是國際80年代中期發展起來的新型水泥節能粉磨設備，具有全部或部分替代能耗高的球磨機系統，並且
降低剛才消耗及噪音的功能，適用於新廠建設，也可用於老廠技術改造，使球磨機系統產量提高30-50%，經過擠
壓後的物料餅中0.08mm細料占20-35%，小於20mm占65-85%，小顆粒的內部結構因受擠壓而充滿許多微小裂紋，易
磨性大為改善。輥麵采用熱堆焊，耐磨層維修更為方便。
Rolling machine is developed in the middle of 1980's, which is a new cement and saved energy
powder grinding equipment. It can displace the low efficiency and high consumption ball mill in
part or completely. Reduce the steel consumption and nose. It's suitable to not only new plant
but also technical revision of old plant. Raise the output by 40 to 60 percent and reduce the
power consumption by 30 to 50 percent. The material which its fineness is 0.8mm covers 20 to 35
percent after aqueezing the material. The fineness is less than 20mm which is covered 65 to 85
percent. The inner structure of small lump is filled with microdefect. Improve the easy
abrasivity. The roller face is heat weld buildup. It's easy to maintenance in the abrasive layer.
主要技術參數 Main technical parameter | 單位 unit | PF80×25 | PF100×30 | PF100×35 | PF120×35 | PF140×65 | PF140×110 |
輥子直徑 Diameter of roller | mm | 800 | 1000 | 1000 | 1200 | 1400 | 1400 |
輥子寬度 width of roller | mm | 250 | 300 | 350 | 350 | 650 | 110 |
喂料粒度 Feeding granularity | mm | ≤40 | ≤50 | ≤35 | |||
入料最高溫度 Max feed temp | ℃ | ≤100 | |||||
粉碎力 Crushing power | KN | 2000 | 3000 | 3500 | 4200 | 4900 | 5200 |
輥子工作間隙 Work gap of roller | mm | 16-25 | |||||
輥子周圍速度 Round speed of roller | m/s | 1.12 | 1.24 | 1.24 | 1.47 | 1.68 | 1.68 |
產量（預粉碎） Output(pre-crush) | t/h | 生料：27-35 raw material 熟料：25-30 clinker | 生料：45-60 raw material 熟料：40-50 clinker | 生料：60-70 raw material 熟料：55-60 clinker | 生料：90-110 raw material 熟料：80-95 clinker | 生料：200-250 raw material 熟料：180-230 clinker | 熟料：460-510 clinker |
新手教學
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
