規格 | SPECIFICATION | NHTX320 | ||||
A | B | C | D | |||
註射裝置 | INJECTION UNIT |
| ||||
螺桿直徑 | SCREW DIAMETER | mm | 67 | 70 | 75 | |
螺桿長徑比 | SCREW L/D RATIO | L/D | 23 | 22 | 20.5 | |
理論註射容量 | SHOT VOLUME(THEORETICAL) | cm3 | 1181 | 1289 | 1480 | |
註射重量 | INJECTION WEIGHT(PS) | g | 1076 | 1175 | 1349 | |
註射速率 | INJECTION RATE | g/s | 337 | 368 | 422 | |
註射壓力 | INJECTION PRESSURE | MPa | 186 | 170 | 148 | |
螺桿轉速 | SCREW SPEED | rpm | 190 | |||
合模裝置 | CLAMPING UNIT |
| ||||
合模力 | CLAMP FORCE | kN | 3200 | |||
移模行程 | OPEN STROKE | mm | 660 | |||
拉桿間距(寬*高) | SPACE BETWEEN TIE BARS(W*H) | mm | 680680 | |||
最大模厚 | MAX.MOULD HEIGHT | mm | 720 | |||
最小模厚 | MIN.MOULD HEIGHT | mm | 250 | |||
頂出行程 | EJECTOR STROKE | mm | 160 | |||
頂出力 | EJECTOR FORCE | kN | 70 | |||
其它 | OTHER |
| ||||
最大油泵壓力 | MAX.PUMP PRESSURE | MPa | 16 | |||
油泵馬達功率 | PUMP MOTOR POWER | kW | 37 | |||
電熱功率 | HEATING POWER | kW | 24.7 | |||
外形尺寸(長*寬*高) | MACHINE DIMENSION(L*W*H) | m | 7.21x1.99x2.34 | |||
油箱容積 | OILTANK CUBAGE | L | 620 | |||
機器重量 | MACHINE WEIGHT | t | 12.8 | |||
新手教學
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
