商品代碼:3513318

  • 現在位置: 首頁 » 貨源 » 機械設備 » 電焊、切割設備 » 其他 »
    數控火焰切割機
    商品代碼: 3513318
    (可點擊以下立即詢價直接線上諮詢,或來電提供此商品代碼諮詢)
    即日起提供日本樂天代購服務-詳見 Rakuten-suki日本樂天代購,謝謝。
    商品詳細說明

    數控切割機采用上海交大控制系統,7寸彩屏顯示,具有斷電續切,回退,鋼板校正等強大功能,主機內部采用國內國際知名品牌電器部件,穩定性高,故障率極低,操作簡單方便,為客戶提高10倍工作效率!

     

    等離子切割機電流可以根據鋼板厚度任意調節,切割效果好,表麵光潔度高。

     

    火焰切割機性能穩定,可以切割6-200MM厚度的材料,切割垂直度好!

































    便攜式數控火焰/等離子切割機

                     MingDePortable CNC Flame/Plasma Cutting Machine

    型號Model

    MD-1020

    MD-1225

    MD-1525

    輸入電源

    Power source

    220±10%VAC 50/60Hz 220W

    切割方式

    Cutting mode

    氧氣/丙烷或乙炔;可配置等離子切割機

    O2/C3H8or C2H2, Plasma available

    有效切割范圍(寬×長)mm

    Effective cutting range(mm)

    1000×2000

    1200×2500

    1500×2500

    導軌 長×寬×厚mm

    Track L×W×H(mm)

    2500×273×60

    3000×273×60

    3000×273×60

    配置的軌枕數量

    Track Holder Quantity

    2

    3

    3

    軌枕長×寬×厚mm

    Track Holder L×W×H(mm)

    500×80×40

    切割速度mm/min

    Cutting speed(mm/min)

    0-3500(最大4000)

    0-3500 (Max 4000 available)

    切割厚度(火焰)mm

    Cutting thickness(Flame)(mm)

    5-150(氧氣+丙烷 或 乙炔)

    5-150 (O2/C3H8or C2H2)

    切割厚度(等離子)mm

    Cutting thickness(Plasma)(mm)

    視客戶等離子電源而定

    In terms of plasma power source

    運行精度

    Move precision

    ±0.2mm/m

    割槍和調高

    Torch

    火焰,電動調高(±60mm)

    Flame,electric height adjustment(±60mm)

    主機重量kg

    Host weight(kg)

    19

    整機重量

    Total weight(kg)

    120

    130

    140

    燃氣壓力Mpa

    Gas pressure(Mpa)

    最大0.1

    Max0.1

    氧氣壓力Mpa

    Oxygen pressure(Mpa)

    最大0.7

    Max0.7

    適用燃氣種類

    Type of gas

    丙烷、乙炔

    Propane, Ethine

    急停按鈕Emergency stop

    有/Yes

    環境溫度

    Working temperature

    -545

    相對濕度

    Relative humidity

    <95%無冷凝

    95% No condensing

    備註:*本產品在用戶無特殊要求時,出廠標配統一為2號丙烷割嘴一個

    Standard configuration is 2#propane cutting nozzle if no special requirement.

    *縱向導軌長度可按客戶要求訂制加長   Tailor-made track if request.

         

     

    功能說明

    * 5.7寸高分辨率液晶顯示屏,人性化操作界麵,全中文/英文菜單,優化操作步驟,屏幕下方標註有操作提示,靈活高效,簡單易學。5.7”high-resolution LCD, human-oriented interface, Chinese and English menu, Optimize operation procedure, tips under the screen, efficiency, flexibility, easy-going and easy learning.

    * 7800*600高分辨率1600萬色彩色高亮度液晶屏。        

    7" high-resolution LCD with 800*600pix,1600 color and high-bright.

    *支持EIA代碼(即G代碼)及FastCAM等各類套料軟件;中英文菜單,適合國內外各類操作人員。 

     Support the EIA code (G code) and all types of nesting software such as FastCAM,etc. English and Chinese menu system.

    *自帶45種常用圖形庫(包括網格圖形),可手工設置片尺寸和孔尺寸,直接切割,無需編程。

    Internal 45 types of basic figures(including the grid graphics), enable to setting piece size and pore size, directly do cutting process, no need programme.

    *采用32位高性能CPU,運用實時多任務控制技術和DSP高速、高精度插補控制技術,工作時高穩定性,高速運行,低噪音。

    32 bits high speed and characteristics, Multi-task Controlling System and DSP high-speed, high-precision interpolation control technology, to increase stability and high speed with low noise.

    *通用U盤傳輸G代碼文件(切割軌跡文件),並可傳輸系統升級文件,使系統功能隨時更新,方便快捷。

    U-disk transfer G-code files(cutting track file), also able to transfer system upgrade files to guarantee the latest function to be installed anytime, convenient and efficient.

    * 256M超大容量存儲空間,能存儲超過5000個復雜異型切割文件;滿足各種復雜程序的運行與加工,輕松處理大程序的運行。

    256M large memory storage, could save more than 5,000 files; easily operating huge and multiple procedure.

    *圖型任意角度旋轉、比例縮放、XY鏡像、矩陣排列、空走、可手工選行及選號等日常操作中的實用功能。

      Graphic scale, rotate, mirror image, matrix permutation, idling, selec line or line number, etc, Which will frequently be used.

    *根據鋼板厚度,在轉角處可自動限速,有效防止過燒。支持邊緣切割、偏移切割,對較厚的鋼板可減少預熱時間,並可避免因排料計算錯誤而造成的板材浪費。     

    Automatically control the cutting speed to avoid over-burning according to plate thickness. Possible to edge cutting, offset cutting, to avoid wasting of meal sheet caused by calculation errors.

    *圖形放大/縮小,放大狀態下可實時跟蹤切割點。自定義全部輸入輸出端口的類型(常開或常閉)和編號。

    Graphics zoom-in or out, and tracking the cutting point dynamically while zoom-in status. Customize the type of all input and output ports (normally open or close) and the number

    *自診斷系統所有IO狀態和按鍵狀態,方便檢查和排除故障。單獨或批量導入導出程序,參數備份及恢復,日期,星期,時鐘顯示。  

    Self-diagnostic system for all IO and keyboard status, convenient for inspection and trouble-shooting. Export files, parameter backup, online upgrade; date, week and time display.

    *支持氧燃氣、等離子及演示模式;各類加工參數齊全,可滿足不同工藝需求。

    Oxygen gas, plasma and presentation modes; various inside machining parameters for match various demand.

    *氧燃氣和等離子IO分開控制;氧燃氣自動調高,兩級預熱,三級穿孔;等離子弧壓反饋,定位反饋,轉角自動關閉弧壓調高。Separately control oxygen gas from plasma IO; adjust the height of oxygen gas automatically, two grades of preheat, three grates of perforation; plasma arc voltage feedback, position feedback, automatically shut down arc voltage in the corner.

    *斷電、斷點數據存儲及恢復功能、退回功能、急停按鈕,自動恢復到未斷電前的狀態,有效避免誤操作。 

    Auto-memory and recovery in case of power-off or point break, return function, emergency stop button, recover to the pre-status automatically, avoid mis-operation.

    *高細分步進電機采用高細分驅動器,噪音低、精度高、運行平穩。 

    High-subdivision stepper motor driver, low noise, high running precision, and movement smoothly.

    *自動割縫補償,割槍移位,割槍穿孔停留,預熱時間智能記憶,鍵盤診斷,溫控風扇。標配電動高度調節裝置及萬能割槍夾緊器。

    Cutting slot compensation auto-setting functioncutting gun movement, cutting gun perforation remain, preheated time auto-memory, keyboard diagnostication, temperature-controlled fan. Auto-adjust height of cutting gun and multiple torch clamp structure.

    *穩定性強,具有超強的等離子高頻抗乾擾能力。*切割速度最大可調到每分鐘3.5,能滿足快速等離子切割的需求。

    Strong stabilization, effective shield plasma high frequency interference. Max cutting speed 3500mm/min, apply to plasma cutting.

    *機箱采用全鋼防磁結構,完全屏蔽電磁輻射,真正抗乾擾、防靜電。

    All steel and anti-magnetic outside frame of NC system and host to ensure reliable and stable operation.

    *系統升級采用U盤升級方式,方便簡單、實用,並提供終身免費升級服務。

    Free upgrade by U-disk easily and conveniently, and also provide free-upgrade at whole lifetime.

    *特有鋼板校正功能,任意鋼板邊可做為校正邊;                                                                                                                                                   Steel board adjustment function,each steel edge could be adjustable.

    *圖形可矩陣排列、交互排列、疊式排列。

    Graphic matrix permutation,alternate permutation,overlapping permutation

    *工件原始尺寸和帶割縫尺寸同時進行顯示,直觀方便。  

     Display original size and size with cutting slot compensation at sametime, easy to control conveniently.

    *等離子弧壓控制支持速度和距離兩種關閉弧壓調高方式,使機床更加平衡、安全。

    Support speed and distance sytle to close THC,to ensure more balance,stable and safety.

    *最大程序行數The maximan lines of program.

    *預留等離子切割機電源接口,可選配各種等離子切割機機型,弧壓跟蹤系統以及初始定位裝置。 

     Plasma cutting machine interface reserved; optionally set up all types of plasma cutting machine and arc voltage tracking system, including initial position and automatic arc voltage tracking system.

    *選配:無線遙控器,可進行前、後、左、右等基本運作和切割開始、停止等切割動作。                                           



    新手教學
    數控火焰切割機_其他_電焊、切割設備_機械設備_貨源_批發一路發
    批發市場僅提供代購諮詢服務,商品內容為廠商自行維護,若有發現不實、不合適或不正確內容,再請告知我們,查實即會請廠商修改或立即下架,謝謝。
    相關商品
    line 線上客服  ID@tsq1489i
    線上客服