ZDY-188全自動端子壓著伺服機(雙端)
ZDY-188 Automatic Terminal Crimping Machine(Double-Crimping)
特點 Features
● 本機無論是外型還是性能均采用國外的先進技術，模塊化的設計思路、結構化的軟件設計，日本先進的數據交換方案，從而保證各個工作模塊的有機聯接，它集送線、切斷、剝頭、壓著為一體，整套工序一次完成。這是中械自動化所推出的又一人性化、智能化的高新技術產品。
● 精度高，速度快的剝線和壓接檢測系統；
● 數字化控制介麵，觸摸式操作麵板；
● 實施著光、電、機、氣、磁一體化的統一PLC控制無須供線器。 一人可管數臺機，大大提高企業的效益。
● Compact and high spped full automatic terminal crimping ma-chine. high productivity and reliability using a positioning unit by servo motor and double drive wire feed unit . the outs tanding performance of the machine can be guaranteed by its;
● Modularized design , program loglc control;
● Structurized software design technology;
● Advanced data-exchange scheme pre-feeder not required. onecan control Several sets of machine,greatly improving the effic-iency of enterprises.one person can operate several devices at the same time,it can improve the enterprise benefit to the large extent.
技術參數 Technical parameters
型號 Model ZDY-188
機能 Function 電線定寸切斷、單雙端剝皮、單雙端壓著；可自動設定壓端位置、剝皮長度、切入深度、打捆提示. The wire may be cut off with the determined size, and it also may be peeled off and crimped from the single/both ends; the crimping position, peeling length, cutting depth and binding prompt may be set automatically.
工作能力 Work ability 兩端壓著3600mm根/小時(長度300mm以內)；
Crimping at both ends of 3600/h (長度300mm以內)；
適用線材 Suitable wire AWG1007#14～#30
切斷長度 Cutting Length 32mm～9，999mm
切斷精度 Cutting Accuracy 0.20mm+(設定長度Set Length X 0.002mm)
剝皮長度 Stripping Length A端(End)：0mm～8mm， B端(End)：0mm～10mm
壓著能力 Crimping capacity 19.6KN / 25.0Kn (2臺sets)
檢測能力 Detection 1.空氣壓力下降 2.電線有無 3.端子有無 4.壓著機手動搖柄 5.未壓端子 6.電線過載 1.Air pressure dro 2.With or without the wire 3. With or without the terminal 4. Manual handle of crimping machine 5. Terminal is not crimped. 6.The wire is overload.
控制方式 control method PLC控制Control
壓縮空氣 Compressed air 0.5-0.8mpa(5-8kgf/cm2) (請使用清潔乾燥氣體 Please use the clean and dry gas)
電源 Power AC220V 50/60Hz
機械尺寸 Dimension 970730X1400mm
重量 Weight 500kg
使用模具 Make the mold OTP直式、橫式模具 OTP Straight、 Horizontal Mold
選用部件 Selected parts 1.卷紙機裝置 2.還原放線裝置
1.Reeler Device 2.Restore supply Device
註：生產能力與電線、端子的種類、大小變化而變化，有些電線不能加工，不作事先通知，請選用原產配件，對機更有保障。
Note:Productivity varies with types and sizes of terminals,so some wires can t be processed without informing in advance.Please selec original products to ensure the security of the machine.
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
