品名:高速鋼 | 材質:DF6Co | 產地/廠傢:一勝特 |
加工工藝:標準 | 用途:標準 | 倉庫:D1庫 |
規格:Φ21,Φ130,Φ140,Φ195,Φ220,Φ38,Φ45,Φ75,Φ90,Φ30,Φ50,Φ60,Φ120(mm) |
● DF6Co是一勝特在DF6(M2)基礎上推出的耐磨性更高,紅硬性更好,仍保持高韌性的含鈷高速鋼。
● DF6Co更高耐磨性主要源於適度的碳飽和度。(控制在M2C之間),提高瞭DF6Co的使用硬度從而更耐磨,同時又保持瞭M2鋼的高韌性。
● DF6Co通過適量鈷的加入獲取瞭更好的紅硬性。鈷的加入有肋使用狀態的穩定和細晶體的保持,有效提升瞭鋼的回火穩定性,同時保持高的韌性。
● 用途:
立銑刀、鋸片銑刀、超硬車刀、機用絲錐、切割圓鋸片等各類刀具。加工不銹鋼及鈦合金有比M2更高的切削效率。
以上資料由上海艾荔艾金屬材料有限公司提供,歡迎新老客戶來電洽購。
Chemical Composition | C | Si | Mn | Cr | W | Mo | V | Co |
(Typical analysis %) | 0.90 | 0.38 | 0.35 | 4.10 | 6.00 | 4.80 | 1.80 | 1.40 |
End mill, Slitting saws, extra hard lathe bit, machine tap, circular saw blades, etc. When processing stainless steel and titanium alloy, DF6Co has better efficiency than M2
Cutting tool | End mill, side and face cutter | Slitting saws blade | Extra hard lathe bit | Screw Tap | H.S.S. Circular Saw Blade |
Workable hardness | 65-66 | 64-66 | 65-67 | 64-66 | 64-66 |
- Basing on DF6 (M2), EAST TOOL introduced cobaltic high speed steel DF6Co, which has stronger wearlessness, better red hardness, and keep high tenacity.
- Moderate saturation degree of carbon (keep between M2 and high carbon M2C), improve the workable hardness of DF6Co, and keep the high tenacity of M2 steel.
- After adding in a right amount of cobalt, DF6Co gets better red hardness. Adding cobalt contributes to stability of carbide and maintenance of fine grain in work, improves the tempering stability of steel and keeps in state of strong wearlessness.
新手教學
批發市場僅提供代購諮詢服務,商品內容為廠商自行維護,若有發現不實、不合適或不正確內容,再請告知我們,查實即會請廠商修改或立即下架,謝謝。