| 產品圖片 |
|
| 產品特點及用途 | ||||||||||||||||||||
|
鉀長石粉 主要用於填充,拋光臘,陶瓷等領域 長石是堿金屬或堿土金屬的鋁矽酸鹽，顏色為淺紅、淺黃或灰白色。莫氏硬度6～6.5，比重2.56～2.69g/cm3。長石的開始熔化溫度低熔融范圍寬，形成的液相粘度較大，可減少坯體變形，便於提高燒成合格率，在陶瓷工業中長石主要是作坯料的熔劑及釉料的主要成分。 在玻璃行業中，長石能引入堿金屬氧化物，減少瞭純堿的用量，其中的Al2O3能降低玻璃的結晶傾向，提高玻璃的粘度和各種性能。 鉀長石（KAlSi3O8）屬單斜晶系，比重2.56～2.59g/cm3。它具有熔點低（1150±20℃），熔融間隔時間長，熔融粘度高等特點，廣泛應用於陶瓷坯料、陶瓷釉料、玻璃、電瓷、研磨材料等工業部門及制鉀肥用。 鈉長石（NaAlSi3O8）屬三斜晶系，比重2.6～2.65g/cm3，呈灰白色帶黃。鈉長石是良好的陶瓷助熔劑原料（起助熔的作用），它具有節約燃料消耗，提高坯體機械強度，降低吸水率等優點，主要用於陶瓷、玻璃、搪瓷等部門。 規格：325目、400目、600目、800目、1000目、1250目、1500目、2000目、2500目、3000目等 |
The English version
Country of origin
Taiwanese
The density of the
(2.5 2.59 g/cm3)
K2O content >
8 (%)
Mohs hardness
6-6.5
Fe2O3 content <
0.1 (%)
color
white
Melting point
- (℃)
Na2O content
5 (%)
Al2O3
16 (%)
Content of SiO2
67 (%)
Potassium feldspar powder
Mainly used for filling, polishing wax, ceramic, etc
Feldspar is alkali metal or alkaline earth metal aluminum silicate, pale red, yellow, or gray in color. 6 ~ 6.5 mohs hardness, specific gravity 2.56 ~ 2.69 g/cm3. Feldspar began melting temperature low melting range wide, formation of the liquid viscosity is bigger, can reduce body deformation, easy to increase the burning rate, feldspar in the ceramic industry is mainly for the main components of the flux of blank and glaze.
In glass industry, feldspar can introduction of alkali metal oxide, reduced the amount of soda ash, one of the Al2O3 can reduce the glass crystallization orientation, enhance the viscosity of the glass and all kinds of performance.
Potassium feldspar (KAlSi3O8) belongs to monoclinic system, the proportion of 2.56 ~ 2.59 g/cm3. It has a lower melting point (1150-20 ℃), melting time interval is long, high melt viscosity etc, are widely used in the ceramic blank, ceramic glaze, glass, porcelain, abrasive material and other industrial departments and potash use.
Sodium feldspar (NaAlSi3O8) belong to triclinic crystal system, and the proportion of 2.6 ~ 2.65 g/cm3, are pale yellow. Albite is a good ceramic flux materials (help melt the role), it can save fuel consumption and improve body for mechanical strength, lower water absorption etc, mainly used in ceramics, glass, enamel and other departments.
Specification: 325 mesh, 400 mesh, 400 mesh, 800 mesh, 1000 mesh, 1250 mesh, 1500 mesh, 2000 mesh, 2500 mesh, 3000 mesh, etc
關於付款：
1、廣東省內支持貨到付款；物流/快遞可代收貨款
2、廣東省外款到發貨
3、支持支付寶支付貨款
關於下單及發貨時間：
全國地區當天下午14：00前下單，當天發貨（物流/快遞)
關於提供樣品：
樣品免費提供，快遞費自付；合作快遞公司：順豐、韻達、全峰，如有其他快遞要求請提前聯系！
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
