我司專業提供線對板連接器TE Connectivity 泰科電子MTA CST-100II; SL-156 系列. 有意者請聯系: 林機先生: 13510815376// +852-69154917 l[email protected]
The MTA-50 IDC Connector
System is a wire-to-printed circuit
board system with contacts
in a staggered, single
row on .050 [1.27] centerline.
The design features wire feedthrough
capability for daisychain
applications. Insulation
displacement contacts are
used to terminate a wide
range of conductor sizes.
Ribbon cable can also be terminated
when the appropriate
receptacle assembly and
strain relief cover are used.
Header assemblies for board
mount applications include
right-angle (horizontal) and
vertical mount products.
These are available in
through-hole and surface
mount configurations.
Typical uses of the MTA-50
IDC connectors would be in
the Appliance, Commercial
and Home Equipment and
Security products industries.
See the following pages for
related products:
Ribbon Cable (reels), .050
[1.27] centerline (p. 71)
Application Tooling (p. 76)
Cable Assemblies (p. 74)
Performance Data
Voltage Rating—30 VAC
Current Rating—1 amp max.
Low-Level Resistance—
30 milliohms
Dielectric Withstanding Voltage—
500 VAC
Insulation Resistance—
1,000 megohms
Operating Temperature—
–55°C to +105°C for connector only;
cable rating may be lower
Technical documents
Application Specification—
114-13072 MTA-50 Connectors
Product Specifications—
108-2113 MTA-50 Connectors
100-4703 MADISON CABLE Cable
Specification (28 AWG,
7/36 Tinned copper,
PVC insulation)
100-6257 MADISON CABLE Cable
Specification (28 AWG,
7/36 Tinned copper,
TPO insulation)
MTA-100 connectors
accept discrete and ribbon
cable wire sizes ranging
from 22 – 28 AWG [0.4 –
0.08 mm2] with maximum
insulation outside diameter
of .060 [1.52] for terminating
single wire and .050
[1.27] for mass termination
of wires. Tin plated solid,
fused stranded, or stranded
(7 strands) wire with PVC
insulation can be used on
22 – 28 AWG [0.4 – 0.9 mm2]
MTA-100 connectors and
19 stranded wire on
22–24 AWG [0.4– 0.2 mm2]
MTA-100 connectors. Only
Performance Data*
Voltage Rating—250 vac
Current Rating—5 amp max.
Low-Level Resistance—
6 m max. initial
Dielectric Withstanding Voltage—
750 vac/1 min.
Insulation Resistance—
5000 M min. initial
Operating Temperature—
55 C to 105 C
Note: Refer to page 70 for approved
wire listings.
one wire to be terminated
into an IDC contact slot.
The wire-to-post connector
housing material is flame
retardant thermoplastic,
either UL94V-2 or UL94V-0
rated.
A full line of .100 [2.54]
centerline headers completes
the system. Headers
are available with straight or
right-angle posts, in flat,
polarized or friction lock
styles. Headers are available
in 2 through 28
positions. Shrouded headers
are available in 2 through
14 positions.
*Refer to the Product Specification
for additional electrical, mechanical
and environmental performance
tests and requirements.
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
