TP-DK3系列機床控制變壓器

概述

TP-DK3系列機床控制變壓器適用於交流50-60HZ,一般輸入額定電壓不超過660V，輸出額定電壓不超過230V的電路中，作為各行各業的各類機床、機械設備等一般電器的控制電源、局部照明和信號燈的電源之用，是其它控制變壓器更新換代的產品，采用進口材料和先進工藝進行制造，具有變壓器體積小、損耗低，工作可靠，接線安全，適用性廣等特點，產品符合GB5226，JB/T5555-2001，VDE0550-1-3，EN61558-1:1997，EN61558-2-13:2000等有關國傢、國際標準，並榮獲歐共體"CE"認證，證書編號：LVD100607-01，可與國外產品互換使用。

TP-DK3系列機床控制變壓器技術特性

初級次級繞組分開繞制，當次級隻有一個繞組時，它擔負變壓器的全部額定容量，次級如兼有控制、照明及指示燈繞組時，則按各繞組容量分配分別繞制，對單繞組且有中間抽頭的變壓器其各中間抽頭容量，皆小於變壓器的額定容量，隻有最高電壓輸出端可擔負額定容量。

TP-DK3 Machine Tool Control Transformer

Application:

TP-DK3 series transformers are used in the 50-60HZ accircuit of input voltage less than 660V and output voltage less than 230V as machine equipment in various area for controlling the power of electrical equipment , lighting and Signal lamp.
This series transformer is favorable and used widely as small size, low loss and reliable function and Safety wire connection. It conforms to GB5226，JB/T5555-201，VDE0550-1-3，EN61558-1:1997，EN61558-2-13:2000and gets CE approval. Verification Number:LVD100607-01.

TP-DK3 series engine bed control transformer technology characteristic

primary secondary circles the system separately, when secondary when a winding, it shoulders the transformer completely the rated capacity, when secondary like has at the same time the control, the illumination and the indicating lamp winding, presses various windings capacity assignment to circle the system separately, to simplex winding, and has intermediate tap's transformer its each intermediate tap capacity, is smaller than transformer's rated capacity, only then the overvoltage out-port may shoulder the rated capacity.