PC/PBT(PC與PBT合金) 1731 沙伯基礎（原GE）_PC/PBT_塑料合金_橡塑_貨源

廠傢(產地)：沙伯基礎(原GE)	牌號：1731	類型：標準料
種類：塑料合金	塑料種類：PC/PBT	用途級別：註塑級

生產廠商：沙伯基礎創新塑料（原GE）

重要參數： 熔體流動速率:9.6 g/10min 密度:0.04 g/cm3 吸水率:0.28 % 成型收縮率:0.5 % 彎曲模量:339000 MPa 熱變形溫度:225 ℃

Property

TYPICAL PROPERTIES ⁽¹⁾
MECHANICAL	Value	Unit	Standard
Tensile Stress, yld, Type I, 50 mm/min	620	kgf/cm²	ASTM D 638
Tensile Strain, brk, Type I, 50 mm/min	120	%	ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	940	kgf/cm²	ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span	23900	kgf/cm²	ASTM D 790
IMPACT	Value	Unit	Standard
Izod Impact, notched, 23°C	68	cm-kgf/cm	ASTM D 256
Izod Impact, notched, -30°C	10	cm-kgf/cm	ASTM D 256
Izod Impact, notched, 23°C, 6.4mm	16	cm-kgf/cm	ASTM D 256
Instrumented Impact Total Energy, 23°C	623	cm-kgf	ASTM D 3763
Instrumented Impact Total Energy, -30°C	626	cm-kgf	ASTM D 3763
THERMAL	Value	Unit	Standard
HDT, 0.45 MPa, 6.4 mm, unannealed	115	°C	ASTM D 648
HDT, 1.82 MPa, 6.4 mm, unannealed	107	°C	ASTM D 648
CTE, -40°C to 95°C, flow	8.28E-05	1/°C	ASTM E 831
Relative Temp Index, Elec	75	°C	UL 746B
Relative Temp Index, Mech w/impact	75	°C	UL 746B
Relative Temp Index, Mech w/o impact	75	°C	UL 746B
PHYSICAL	Value	Unit	Standard
Specific Gravity	1.22	-	ASTM D 792
Specific Volume	0.82	cm³/g	ASTM D 792
Mold Shrinkage, flow, 3.2 mm (5)	0.5 - 0.7	%	SABIC Method
Mold Shrinkage, xflow, 3.2 mm (5)	0.6 - 0.8	%	SABIC Method
ELECTRICAL	Value	Unit	Standard
Arc Resistance, Tungsten {PLC}	5	PLC Code	ASTM D 495
Hot Wire Ignition {PLC)	2	PLC Code	UL 746A
High Voltage Arc Track Rate {PLC}	2	PLC Code	UL 746A
High Ampere Arc Ign, surface {PLC}	0	PLC Code	UL 746A
Comparative Tracking Index (UL) {PLC}	2	PLC Code	UL 746A
FLAME CHARACTERISTICS	Value	Unit	Standard
UL Recognized, 94HB Flame Class Rating (3)	1.49	mm	UL 94

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。