Installation & Application Notes:
Section I – Physical Characteristics
1.1 LED Driver shall be installed inside an electrical enclosure.
1.2 Wiring inside electrical enclosure shall comply with 600V/105°C rating or higher.
Section II – Performance
2.1 LED Driver complies with UL standard UL1012.
2.2 LED Driver has Class A sound rating.
2.3 LED Driver has a minimum ambient operating temperature of -40°C.
2.4 LED Driver has a life expectancy of 50,000 hours at Tcase of ≤ 75°C.
2.5 LED Driver has a life expectancy of 100,000 hours at Tcase of ≤ 65°C.
2.6 LED Driver has a typical self rise of 25°C at maximum load in open air without heat sink.
2.7 LED Driver maximum allowable case temperature is 80°C – see product label for measurement location.
2.8 LED Driver reduces output power to LEDs if max allowable case temperature is exceeded.
2.9 LED Driver has a failure rate of ≤ 0.01% per 1,000 hours at Tcase ≤ 70°C.
2.10 LED Driver tolerates sustained open circuit and short circuit output conditions without damage.
2.11 LED Driver complies with the requirements of the Federal Communications Commission (FCC) rules and
regulations, Title 47 CFR Part 15 Non-Consumer (Class A).

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。