ng>ng> ng>ng>
ng>導熱材料ng>ng>
ng>ng>產品型號ng>ng>:ng>
<導熱膠帶QT98-F> <導熱膠帶QT98-A> <導熱膠帶QT98-N>
ng>產品說明ng>ng>:ng>
導熱材料Thermal Interface Material包含導熱片Thermal Pad,導熱膠帶Thermal Tape,導熱膏Thermal Grease等.用來填充IC與散熱片中間的空隙,提供最完善的導熱條件,使得IC上的熱能,順利的導入到散熱片上,降低IC溫度.浩正電子提供高導熱的導熱材料,品質優良,擁有業界頂尖的研發與量產技術,成功的把導熱片Thermal Pad,和導熱膠帶Thermal Tape等產品,應用在各種發熱的解決發案上,絕對是您最好的選擇.
導熱片與散熱片其實在功能上有所不同,導熱片的英文是Thermal Pad, Thermal Interface Pad,或是Thermal Gap Filler等名稱,通常由矽膠,壓克力膠,陶瓷粉末等組合而成.顧名思義,負責導熱Heat Transferring.散熱片的英文是Heat Sink,或是Heat Spreader等名稱.通常由銅板或鋁板壓鑄或沖型製成.負責散熱Heat Spreading,及冷卻Heat Cooling.一般來說,由導熱片,散熱片,風扇所組成的模組,叫做散熱模組.熱傳導的途徑,由IC表麵,經過導熱片(Thermal Pad)或導熱膠帶(Thermal Tape),導熱貼片(Thermal Paste)等導熱材料,有效率地傳導至散熱片Heat Sink / Heat Spreader上,散熱片的表麵積越大,其散熱效果越好,最後由風扇將熱能整個加速帶開,完成散熱作用.
浩正電子有多款導熱材料可供選擇,提供高導熱效果,低成本的解決方案.應用在NB手提電腦, LCD TV液晶電視, LED照明,電源供應器, DDR Pad記憶體模組等產品.效果絕佳,深獲好評.歡迎隨時來電洽詢.
導熱片標準尺寸為310310mm,厚度從0.3mm, 0.5mm, 1.0mm到20.0mm等.
導熱膠帶標準寬度為1240mm,長度為50M.厚度為0.3mm.
ng>各導熱材料型號如下ng>ng>:ng>
ng>導熱膠帶ng>ng>Thermal Tape:ng>
ng> ng> | ng>單位ng> ng>Unitng> | ng>QT98Fng> | ng>QT98Ang> | ng>QT98Nng> | ng>測試方法ng> ng>Test Methodng> |
ng>基材ng> ng>Baseng> | ng>--ng> | ng>玻纖佈ng> ng>Fiberng> | ng>鋁箔ng> ng>Al. foilng> | ng>無ng> ng>Nong> | ng>--ng> |
ng>顏色ng> ng>Colorng> | ng>--ng> | ng>白色ng> ng>Whiteng> | ng>白色ng> ng>Whiteng> | ng>白色ng> ng>Whiteng> | ng>--ng> |
ng>厚度ng> ng>Thicknessng> | ng>mmng> | ng>0.15 / 0.3ng> | ng>0.12ng> | ng>0.05ng> | ng>ASTMng> ng>D751ng> |
ng>剝離力ng> ng>Peeling Strengthng> | ng>Kg/inng> | ng>1.4ng> | ng>1.2ng> | ng>1.2ng> | ng>PSTC-1ng> |
ng>保持力ng> ng>Holding Powerng> | ng>Hrsng> | ng>48ng> | ng>36ng> | ng>36ng> | ng>PSTC-7ng> |
ng>耐電壓值ng> ng>Insulation Strengthng> | ng>Voltageng> | ng>>5000ng> | ng>0ng> | ng>0ng> | ng>ASTMng> ng>D149ng> |
ng>工作溫度範圍ng> ng>Temperature Rangeng> | ng>℃ng> | ng>-20~+120ng> | ng>-20~+120ng> | ng>-20~+120ng> | ng>--ng> |
ng>熱傳導係數ng> ng>Thermal Conductivityng> | ng>W/m-kng> | ng>1.2ng> | ng>1.4ng> | ng>1.2ng> | ng>ASTMng> ng>D5470ng> |
ng>母卷尺寸ng> ng>Roll widthng> | ng>mmng> | ng>1250ng> | ng>980ng> | ng>980ng> | ng>--ng> |
