| 加工定制：是 | 材質：PE | 厚度：0.04——0.06（mm） |
| 寬度：1250（mm） |
主要用途：
光潔度高，對光滑的塑料表麵有良好的貼合力，高溫穩定性好，可隨板材一起高溫成型以保護表麵，可輕松脫膜，適用於PMMA亞克力浴缸板、PC吸塑板（片）等。
主要特點：
優良的耐溫性，表麵清潔平整，透明度高，熱收縮率低，柔韌性優良，離型效果好，耐快壓，傳壓高溫壓合，壓合後無殘留物，無碎裂，不殘膠，粘著力強，抗張力強，耐老化。
Technical Data of
A-215 film is a surface protection film which was developed using our mluti-layer co-extrusion technology. Compared with the adhesive protective film coated, acrylic or rubber adhesives:
.Much less adhesive residue
.Absolutely no solvent, and no residual solvent
Base Layer (Polyethylene)
Middle Layer (Polyethylene)
Adhesive Layer
Thickness | μm | 50 | |
ThicknessTolerance (AVE) | ±1 | ||
Adhesive Force for PC film *1 | Initial | N/25mm | 0.05 |
After 80℃×30min | N/25mm | 0.1 | |
Tensile Strength *2 | MD | MPa/10mm | 3 |
CD | 4 | ||
Elongation *2 | MD | % | 130 |
CD | 300 | ||
Haze | % | 20 | |
COF ( Non-adhesive Layer/Non-adhesive Layer ) | 0.3 | ||
Gel Performance | Diameter≥1MM, None. | ||
Diameter:0.5MM-1MM, Number≤5P/ m2 | |||
Diameter≤0.5MM,Number≤40P/m2 | |||
*1 180°Peeling , Velocity : 300mm/min
*2 Initial Effective Length;100mm, Tensile Velocity:300mm/min
Those values are representative and subject to change without notice. These data are should not be used for specification purposes
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
