源於專業技術的
 —制造工藝
卓越的塗料傳遞效果
—高效省漆
人體工程學設計
—操控靈活
噴塗目標
—輕松實現完美效果
From professional technology--Manufacturing process
Excellent passing result of the material--Efficient, paint saving 
Ergonomics design--Flexible controlling
Spraying Aim--realizing easily,perfect result

噴槍選定的標準
Standard of the choosing of SPRAY GUN

噴漆工件的大小？
小型、大型噴槍的選定
小零件、玩具、小件物品、汽車修補等······小形（LPH-50100W-101）
大零件、車輛、建築物，生產線噴漆，大件噴漆等······大形
Size of the item?
Choosing of s:mall,large SPRAY GUN
small parts,toys,small thins,vehicle repairing,etc......(SMALL(LPH-50/100/W-101)
large parts,vehicles,buildings,production line paint spraying,large items paint spraying...LARGE
噴塗量或者麵積？
塗料供給方式的選定（重力式·吸上式@壓送式）
少量噴塗，換色頻繁的情況下，使用重力式(G型）塗料杯方便少量及中量噴塗、換色噴塗多的
情況下，使用吸上式（S)型容器罐方便。
同色大量生產線噴塗等，用壓送式（P型）塗料泵和加壓容器罐方便。
Quantity or area?
Choosing of the method of the spraying metrial(Gravity,Suction,Pressure)
Under the condition of Small quantity of paint,and changing color frequently,the GRAVITY(G) will be used.Under the conditon of small and medium quantity of paint,SUCTIon(S) will be used.Under the condition of using large quantity of paint in the largeprodution linr,PRESSURE(P) will be used.

噴塗的步驟和粘度？
塗料噴嘴口徑和空槍帽的選定
麵漆（成品）噴塗等，要求特別微粒化的塗料粒子，根據塗料噴出量必須選擇空氣量多的型號，
特別是金屬性噴塗等，空氣量必須盡可能大。
塗料粘度和塗料噴嘴口徑的選定
必須根據塗料粘度選定噴嘴口徑，一般來說，塗料粘度低選擇小口徑，塗料粘度高選擇大口徑。
壓送式型號，噴嘴口徑小也能在低粘度到高粘度比較廣的范圍內使用。

Procedure and Viscosity of the spraying:
Choosing of the nozzle gun cap of the spray gun:
When spraying the surface of the items,special particle is required,according to the paint spraying quantity,the type of large air volume will be chosen,esp.the metal spraying.
The nozzle must be chosen according to the viscosity.Generally speaking,if the viscosity is low,the small nozzle will be chosen,otherwise the big one.
The Pressure Type,the small nozzle can be used in a large field,from low to high viscosity.

中野噴漆槍分類
Kinds of spray gun of JOHGYIA
重力式（上壺）    虹吸式（下壺）    壓送式 （壓力桶）
GRAVITY (top pot)     SIPHon (under pot)       PRESSURE(pressure barrel)
 中野公司所有手動噴槍的壓縮空氣接口國內均為快速氣接頭，
All the air connector in JOHGYIA  are quick connector.
 中野公司中小型手動噴槍的塗料接口均為1/4英寸（外螺紋）
         Manual control spray gun:    The size of the connector  is 1/4 inch(male)
        大型手動噴槍為3/8英寸（外螺紋） 
          Large manual contro spar gun:3/8 inch(male)
 也可根據客戶要求樣式配置。
 The connector can also ne deployed according to the guests.

怎樣選用中野噴槍
How to choose JOHGYIA spray gun?
底漆噴塗    麵漆噴塗   小修補噴塗
primer paint   surface paint    repair paint
小幅麵底漆噴槍   傳統高氣壓噴塗  高流量低氣壓噴塗  低流量中氣壓噴塗  環保省漆小修補噴槍
Small format primer spray gun,troditional high pressure spray gun,high flow low pressure spray gun,low flow medium pressure spray  gun, environmental repairing spray gun.
大幅麵高效底漆噴槍  傳統麵漆噴槍  環保省漆麵漆噴槍  HVLP省漆高效麵漆噴槍
Large format efficient primer spray gun,troditional surface paint spray gun,environmental surface paint spray gun,HVLP efficient surface paint spray gun

一、噴塗距離
1.Distance of spraying:
傳統高壓噴槍：18~23cm  HVLP高流量低壓噴槍：13~17cm
Troditional high pressure spray gun:18--23cm
HVLP high flow low pressuer spray fun:13--17cm
二、噴槍移動方式
  Moving method

2.軌道式噴塗：噴槍與待噴件保持一定垂直距離，勻速往復運行。
  Track style spraying:keep the gun the item verticle,move forward and backward
三、噴槍與塗裝表麵角度
 The angle of the gun and surface
角度：噴塗時噴槍頭部與被噴件永遠保持垂直。
angle:when spraying, the head of the gun and the painted iten will keep verticle

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。