ng>



ng>

ng>主要功能特點：ng>
用於測量汽車排放廢氣中的HC、CO、CO₂、O₂及NO_x氣體濃度，自動計算顯示空燃比λ，可對發動機燃燒性能及排放污染情況進行綜合檢測。采用國外先進技術，進口關鍵零部件組裝而成。具有高亮度數位顯示，自動校零，自動數據線性化處理，氣路阻塞時自動報警，故障時自動診斷所在單元，打印測試之日期、時間功能，配內置打印機（或模擬輸出接口或RS－232A數字串行通信接口），可進行自由怠速和雙怠速測量，具有操作方便，測量數據準確，工作穩定可靠等特點。
ng>主要技術參數：ng>

測量范圍              HC：0～10000×10^-6（ppm）vol      CO:0～10×10^-2(%)vol

                      CO₂:0～20×10^-2(%)vol             O₂: 0～25×10^-2(%)vol

                      NO_x:0～5000×10^-6（ppm）vol  λ:0.5～1.5  CO_cor:0～10×10^-2(%)vol

示值誤差              HC±12  ×10^-6（ppm）vol(絕對誤差)或±5%(相對誤差)

                      CO±0.06×10^-2(%)vol    (絕對誤差)或±5%(相對誤差)

                      CO₂±0.5×10^-2(%)vol    (絕對誤差)或±5%(相對誤差)

                      O₂ ±0.1×10^-2(%)vol    (絕對誤差)或±5%(相對誤差)

                      NO_x±25×10^-6（ppm）vol(絕對誤差)或±4%(相對誤差)

重復性                重復誤差≤±2%

穩定性                自動校零，量矩漂移≤±3%

分辨率                HC：1×10^-6（ppm）vol   CO: 0.01×10^-2(%)vol   CO₂: 0.1×10^-2(%)vol

                      O₂: 0.01×10^-2(%)vol    NO_x:1×10^-6（ppm）vol   λ:0.01

響應時間              95%響應不大於10秒

預熱時間              8min（可預熱3min應急檢測）

輸出方式              數字直讀顯示，可附打印機打印氣體名稱，濃度最大值，測試時間、日期等。可附接口與計算機聯網

環境條件              溫度0～40℃，相對濕度≤90%

電源                  AC100-240V 50Hz 或DC12V（選加電源逆變器）消耗功率50VA

外形尺寸              420mm(長)×310mm(寬)×170mm(高)

重量                  約9kg

ng>Mainng>ng>Features:ng>

Used to measure vehicle emissions of HC, CO, CO2, O2 and NOx gas concentration, automatic calculation shows that air-fuel ratio λ, can be the engine combustion performance and emissions of pollution in a comprehensive test. Use of advanced foreign technology, import the key components assembled. With a high-brightness digital display, automatic zero, linear automatic data processing, auto-alarm when the gas line blocking, fault diagnosis where the unit automatically and print testing date, time functions, with built-in printer (or the analog output interface or RS -232A digital serial communication interface), can be freely idling and dual idling measure, with convenient operation, accurate measurement data, work stable and reliable characteristics.

ng>Main technical parameters:ng>

Test Scope：HC：0～10000×10^-6（ppm）vol     CO：0～10×10^-2(%)vol

CO₂：0～20×10^-2(%)vol            O₂：0～25×10^-2(%)vol

NO_x:0～5000×10^-6（ppm）vol      λ：0.5～1.5    CO_cor：0～10×10^-2(%)vol

Shows the value error：HC ± 12×10^-6（ppm）vol (absolute error)or± 5% (relative error)

CO± 0.06×10^-2(%)vol   (absolute error)or± 5% (relative error)

CO₂±0.5×10^-2(%)vol   (absolute error)or± 5% (relative error)

O₂ ±0.1×10^-2(%)vol     (absolute error)or± 5% (relative error)

NO_x±25×10^-6（ppm）vol (absolute error)or±4%(relative error)

Stability：Automatic zero, volume moments drift ≤ ± 3%
Repeatability：Repeat error ≤ ± 2%
Resolution：HC：1×10^-6（ppm）vol   CO：0.01×10^-2(%) vol

CO₂：0.1×10^-2(%) vol     O₂：0.01×10^-2(%) vol

NO_x:1×10^-6（ppm）vol    λ：0.01  

Response Time：95% of the response to no more than 10 seconds
Warm-up Time：8 min（May the preheating 3min urgent examination）

Output Mode：Digital direct-reading show that gases can be attached printer name, in

accordance with national standard concentration and concentration of

the average maximum test time, date, etc.. Can be attached to

interface with the computer network

Environmental conditions：Temperature 0 ~ 40℃, relative humidity ≤ 90%
Power：AC100-240V  50Hz or DC12V (selec plus power inverter) Power

consumption 50VA
Dimensions：420mm (length) × 310mm (width) × 170mm (H)
Weight：about 9kg

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。