| 加工定制：是 | 類型：便攜式頻譜分析機 | 品牌：Gwinstek/固緯 |
| 型號：GSP-830TG | | |
| 特點 |
低底噪(-117dBm@1GHz, 3k RBW)
自動測量功能
順序編程測量功能
ACPR, OCBW, Channel Power, N-dB 和相位抖動測量功能
編輯限制線進行通過/失敗測量
10 組遊標(包括△遊標和峰值功能)
分割視窗,允許獨立的設置
AC/DC/電池 多種供電模式
USB/RS-232C/GPIB(選配) 接口
直接 VGA 輸出
6.4" TFT 彩色 LCD, 解析度: 640480
輕巧的體積 , 330(W) x 170(H) x 340(D) mm
6公斤的極輕重量(不包含配件)
選配信號追蹤發生器
選配前置放大器 |
頻率 |
| 頻率范圍 | 9kHz ~ 3GHz |
| 老化率 | ± 10ppm, 0~50°C, 5ppm/年 |
| 頻寬范圍 | 2kHz ~ 3GHz 在 1-2-5 順序步進, 全展頻, 零展頻 |
| 相位噪聲 | -80dBc/Hz @1GHz 20kHz offset 典型值 |
| 掃頻時間范圍 | 50ms ~ 25.6s |
解析度帶寬 |
| 解析度帶寬范圍 | 3kHz, 30kHz, 300kHz, 4MHz |
| 解析頻寬精確度 | 15% |
| 視頻頻寬范圍 | 10Hz ~ 1MHz 1-3 步進 |
幅度 |
| 測量范圍 | -103dBm ~ +20dBm: 1MHz ~ 15MHz, Ref.Level @ -30dBm
-117dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-110dBm
-114dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-110dBm
(Span = 50kHz, RBW = 3kHz) |
| 過載保護 | Max. +30dBm, ±25VDC |
| 參考電平范圍 | -110dBm ~ +20dBm |
| 精確度 | ±1dB @100MHz |
| 頻率平坦度 | ±1dB |
| 幅度線性度 | ±1dB over 70dB |
動態范圍 |
| 平均背景噪聲 | <-135±1dBm/Hz: 1MHz ~ 15MHz, Ref.Level @ -30dBm
<-149dBm/Hz, typical -152dBm/Hz: 15MHz ~ 1GHz, Ref.Level ≧-110dBm
<-146dBm/Hz, typical -149dBm/Hz: 1GHz ~ 3GHz, Ref.Level ≧-110dBm |
| 三階交調失真 | <-70dBc RF Input @-40dBm, Ref.Level @-30dBm |
| 協波失真 | <-60dBc RF Input <-40dBm , Ref.Level @-30dBm |
| 非協波偽噪聲 | <-93dBm, 1MHz ~ 15MHz, Ref.Level @-30dBm
<-107dBm ~ +20dBm: 15MHz ~ 1GHz, Ref.Level ≧-110dBm
<-104dBm ~ +20dBm: 1GHz ~ 3GHz, Ref.Level ≧-110dBm
(Span = 50kHz, RBW = 3kHz) |
總體 |
| 顯示器 | 640 x 480 高分辨率 TFT 彩色 LCD |
| 分割視窗 | 動態視窗: 上, 下 或交替 (兩個同時掃描視窗) |
| 遊標 | 10 組峰值遊標: 5 組△遊標
功能: Delta, To Peak, To Minimum, Peak Track, Peak Table, Peak Sort |
| 軌跡偵測 | 3 個軌跡功能：峰值, 最大值保持, 凍結, 平均, 軌跡數學運算 |
| 功率測量 | ACPR, OCBW, 信道功率, N dB 帶寬和相位抖動 |
| 自動設定功能 | 自動偵測並顯示 |
| 觸發 | 條件: 視頻, 外部 (正向, +5V TTL 外部信號)
模式: 普通, 單次, 連續 |
| 順序編程測量 | 可以不通過遠端控制軟件自動執行測試用戶定義的程序段, 10 組順序程序段設置 和 每個設置可有10 個程序段, 變量延遲 和 等待通過功能使自動測量更容易, 可順序鏈接和嵌套不同的順序設置. |
連接器 |
| 射頻輸入 | N 型母頭, 50Ω 標準
射頻輸入 VSWR: <2:1, @0dBm 參考電平 |
| 外部參考 | BNC 母頭 |
| 時鐘輸入 | 1M, 1.544M, 2.048M, 5M, 10M, 10.24M, 13M, 15.36M, 15.4M, 19.2MHz |
| 參考時鐘輸入 | BNC 母頭, 10MHz |
| 直流輸入 | 插孔: 5.5mm, 12V |
| 直流輸出 (for GAP-801) | 類型: SMB 公頭, 最大輸出 +9V/100mA. |
接口 |
| RS-232C | Sub-D 9 針母頭 |
| USB | USB Host/Device 全速 |
| VGA 輸出 | 前麵板: 可插FLASH卡的A型插座 |
| 選配: GPIB 接口 | IEEE 488.2 總線 |
| 電源 | |
| | AC 100 ~ 240V, 50/60Hz |
| 附件 |
| | 操作手冊 x 1
電源線 x 1
USB 線(A型插頭轉小B型插頭) x1 |
| 尺寸和重量 |
| | 330(W) x 170(H) x 340(D) mm
約 6kg |
操作手冊 x 1
電源線 x 1
USB 線(A型插頭轉小B型插頭) x1
ng>GSP-830 3GHz Spectrum Analyzerng>
| ng>Opt. 01ng> | ng>Tracking Generatorng> | ng>Tracking Generatorng> ng>- Frequency Range: 9k~3GHzng> ng>- Amplitude Range: -50dBm~0dBmng> ng>- Amplitude Accuracy: ±1dB@100MHz, 0dBmng> ng>- Amplitude Flatness: ±1dB@0dBmng> ng>- Harmonics: <-30dBc typicalng> ng>- Reverse Power: +30dBmng> ng>- Impedance: Type: N female, 50Ω nominalng> ng>- RF output VSWR: < 2:1ng> |
| ng>Opt. 02ng> | ng>Battery packng> | ng>* 11.1V Li-Ion battery pack *2ng> |
| ng>Opt. 03ng> | ng>± 1ppm Stabilityng> | ng>* ±1ppm, 0~50 °C , ±1ppm/yrng> |
| ng>Opt. 04ng> | ng>300Hz RBWng> | ng>* RBW 300Hz, 3dB bandwidth, RBW Accuracy: 20%ng> |
| ng>Opt. 05ng> | ng>EMI Filter 9kHz & 120kHz RBW(*)ng> | ng>* RBW selections: 9kHz & 120kHz, 6dB bandwidth, Accuracy: 15%ng> |
| ng>Opt. 06ng> | ng>10kHz & 100kHz RBW (*)ng> | ng>* RBW selections: 10kHz & 100kHz, 3dB bandwidth, Accuracy: 15%ng> |
| ng>Opt. 07ng> | ng>Demodulator (*)ng> | ng>* Demodulation: AM/ FMng> ng>* Output: Internal speaker, 3.5mm stereo jack wired for mono operationng> ng>* RBW selection: 10kHz & 100kHz, 3dB bandwidth, Accuracy: 15%ng> |
| ng>Opt. 08ng> | ng>GPIB Interfaceng> | ng>* IEEE 488 busng> |
ng>Note:ng> ng>1. (*) only one option can be selection between Opt. 05, 06, 07ng> ng>2. All options are factory-installed except opt.02.ng> |
| ng>ng>OPTIonAL ACCESSORIESng>ng> |
| ng>ng>ATA-001ng>ng> | ng>ng>BNC Antennang>ng> ng>(An additional ADP-001 is needed for fitting GSP spectrum analyzers)ng> |
| ng>ng>ATA-002ng>ng> | ng>ng>Near Field Probeng>ng> ng>(An additional ADP-001 & GTL-110 is needed for fitting GSP spectrum analyzers)ng> |
| ng>ng>GAP-801ng>ng> | ng>ng>Preamplifier ng>Preamplifier with 10dB(typical), gain 9kHz ~ 6GHzng> |
| ng>ng>GAP-802ng>ng> | ng>ng>Preamplifier ng>Preamplifier with 20dB(typical), gain 9kHz ~ 3GHzng> |
| ng>ng>RLB-001ng>ng> | ng>ng>Return Loss Bridge ng>RLB Frequency Range 10MHz ~ 1GHzng> |
| ng>ng>GTP-3000ng>ng> | ng>ng>Passive touch Probe Setng>ng> ng>PR-03: Passive touch probe, SMA(F)ng> ng>ADP-002: Adaptor, SMA(J/F) ~ N(P/M)ng> ng>GTL-303: RF Cable Assembly, SMA(P/M), 600mmng> |
| ng>ng>GKT-001ng>ng> | ng>ng>General Kit setng>ng> ng>ADP-002: adaptor, SMA(J/F) ~ N(P/M) x 2ng> ng>ATN-100: 10dB attenuator, N(J/F) ~ N(P/M) x 1ng> ng>GTL-303: RF cable assembly(SMA(P/M),RD316,600mm)x2ng> ng>GSC-002: Kit box x 1ng> |
| ng>ng>GKT-002ng>ng> | ng>ng>CATV Kit setng>ng> ng>ADP-001: adaptor, BNC(J/F) ~ N(P/M) x 2ng> ng>ADP-101: adaptor, BNC(J/F)75Ω ~ BNC(P/M)50Ωx 2ng> ng>GTL-304: RF cable assembly(RG223,N(P/M)-N(J/F),300mm)x2ng> ng>GSC-003: Kit box x 1ng> |
| ng>ng>GKT-003ng>ng> | ng>ng>RLB Kit setng>ng> ng>GAK-001: termination 50 , N(P/M) x 1ng> ng>GAK-002: Cap with chain, N(P/M) x 1ng> ng>GTL-302: RF cable assembly(RG223,N(P/M),300mm)x2ng> ng>GSC-004: Kit box x 1ng> |
| ng>ng>GKT-006ng>ng> | ng>ng>EMI Probe Kit setng>ng> ng>ANT-01: 6cm Loop, H-Field Probe x 1ng> ng>ANT-02: 3cm Loop, H-Field Probe x 1ng> ng>ANT-03 6mm Stub tip, E- Field Probe x 1ng> ng>PR-03: Touch Passive Probe x 1 ADP-02: N(P/M)~SMA(J/F) Adapter x 1ng> ng>ADP-01: N(P/M)~BNC(J/F) Adapter x 1ng> ng>Test Lead: BNC(P/M)~BNC(P/M) RF Cable x 1ng> ng>Test Lead: SMA(P/M)~SMA(P/M) RF Cable x 1ng> |
| ng>ng>GRA-404ng>ng> | ng>ng>Rack Adapter Panelng>ng> ng>Rack Mounting (19", 4U)ng> |
| ng>ng>GSC-001ng>ng> | ng>ng>Soft Carrying Caseng>ng> |
| ng>ng>GTL-301ng>ng> | ng>ng>RF Cable ng>RG 223 N(P/M), 1000mmng> |
| ng>ng>GTL-401ng>ng> | ng>ng>DC Power Cordng>ng> ng>DC power cord with DC Jack and lighter plug, Current 5Ang> |
新手教學
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
