操作簡單,對焊工要求較低。
● 采用CK2系列控制器,可對焊接過程的夾緊、焊接、頂鍛、維持、休止等參數進行分別調節控制。設備操作簡單,便於掌握。
● 電阻對焊工藝簡單,焊件的縮短量小、毛刺少,有利於簡化後道工序。
● 適用於低碳銅、純銅、黃銅、不銹鋼、鋁等金屬的線材或直徑小於20mm的棒材的對焊。
WHY-CK series controller are used,which can achieve a separate regulation and control of the clamping,welding,
upsetting,holding,pausing,etc.in the welding process.The equipment can be operated easily.
The resistance welding process is simple.Shrinkage of work piece is small and has less bur,which is advantageous to simplify subsequent work steps.
Suitable for butt weld joint between line materials such as low carbon copper,brass,stainless steel,aluminum,etc.or bars with a diameter of less than 50 mm.
項目(單位) 型號 | UN-25 | UN-40 | UN-63 |
額定容量 | KVA | 25 | 40 | 63 |
電源輸入 | V | 380 | 380 | 380 |
額定頻率 | Hz | 50/60 | 50/60 | 50/60 |
最大焊接電流 | A | 11000 | 15000 | 19000 |
負載持續率 | % | 50 | 50 | 50 |
最大夾緊力 | N | 3900 | 3900 | 3900 |
最大頂鍛力 | N | 1500 | 1500 | 1500 |
外形尺寸 | mm | 900700X1020 |
重量 | kg | 260 | 300 | 340 |