項目名稱Item | 單位Unit | 參數 Parameters | |
工作臺 Working Table | 工作麵積(寬×長)Working surface(W×L) | mm | 320×1320 |
承載重量Load | kg | 500 | |
T型槽數目No.of T-slots |
| 3 | |
T型槽寬度Width of T-slots | mm | 18 | |
T型槽間距Distance between T-slots | mm | 70 | |
行程 Travel | X向(工作臺縱向)手動/機動Longitudinal (manual / auto) | mm | 700/680 |
Y向(滑座橫向)手動/機動Cross (manual / auto) | mm | 255/240 | |
Z向(升降臺垂向)手動/機動Vertical(manual / auto) | mm | 370/350 | |
主軸 Spindle | 最大回轉角度Max.swivel angle | deg | ±45° |
轉速Speed | r/min | 30-1500 | |
轉速級數No.of spindle speeds | 級step | 18 | |
錐孔Taper |
| ISO7:24 No.50 | |
軸向移動距離Axial motion | mm | 70 | |
主軸端麵至工作台面距離最小/最大 Distance from spindle nose to table surface Min./Max | mm | 30/400 | |
主軸中心線至床身垂直導軌麵距離 Distance from center line of spindle to vertical guide way surface of column | mm | 350 | |
進給 Feedrates | 縱向進給速度Longitudinal feed rate | mm/min | X:23.5~1180 |
橫向進給速度Cross feed rate | mm/min | Y:15~786 | |
垂向進給速度Vertical feed rate | mm/min | Z:8~394 | |
縱向快速移動速度Longitudinal rapid feed rate | mm/min | X:2300 | |
橫向快速移動速度Cross rapid feed rate | mm/min | Y:1540 | |
垂向快速移動速度Vertical rapid feed rate | mm/min | Z:770 | |
進給級數No.of feeds | 級Step | 18 | |
電動機 Motor | 主軸電機功率Power of spindle motor | kW | 7.5 |
進給電機功率Power of feed motor | kW | 2.2 | |
其他 Others | 機床外形尺寸(長×寬×高)Overall dimension(L×W×H) | mm | 2294×1770×2002 |
機床凈重(約)Net weight of machine(approximately) | kg | 2800 |
X5032型立式升降臺銑床是改進型通用產品.該產品操作方便,性能可靠,廣泛適用於各類機械加工部門,加工各種平面、溝槽、齒輪等。配置萬能銑頭、圓工作臺、分度頭等銑床特殊附件、可進一步擴大機床使用范圍。 Knee type vertical milling machine model X5032 is general purposed product. The machine features easy operation and high stabillity. These machines are widely suited for flat surfaces,grooves and gear machining in various mechanical machining sectors.When being provided accessories such as universal milling head,rotary working table and indexing head etc.can enlarge the appilcation of machine.
批發市場僅提供代購諮詢服務,商品內容為廠商自行維護,若有發現不實、不合適或不正確內容,再請告知我們,查實即會請廠商修改或立即下架,謝謝。