型號Mode | Unit | SJ680 |
合型力/Die locking force | KN | 6800 |
大杠內間距/ Space between tie bars | mm | 800*800 |
大杠直徑/Tie bar diameter | mm | Φ160 |
模具厚度(最小-最大)Die thickness(Min-Max) | mm | 350~900 |
合模行程/Locking stroke | mm | 650 |
頂出行程/Ejection stroke | mm | 160 |
頂出力/Ejection force | KN | 315 |
壓射力/Injection force | KN | 610 |
壓射位置/Injection position | mm | 0、-250 |
壓射頭直徑/Plunger diameter | mm | 70 | 80 | 90 |
射料量(鋁)/Injection weight | KG | 4.7 | 6.2 | 7.7 |
鑄造壓力(增壓)/Casting pressure (Intensifg.) | Mpa | 158 | 121 | 95 |
鑄造麵積/Casting area | cm² | 430 | 561 | 715 |
最大鑄造麵積(40Mpa)/Max.Casting area (40Mpa) | cm² | 1700 |
壓射頭推出距離/Plunger penetration | mm | 280 |
壓射室法蘭直徑/Casting flange diameter | mm | Φ150 |
壓射室法蘭凸出定板高度/Height of pressure chamber flange | mm | 15 |
壓射行程/Injection stroke | mm | 650 |
空循環周期/Dry cycle | S | 14 |
系統工作壓力/System working pressure | Mpa | 14 |
電動機功率/Motor power | KW | 37 |
油箱容積/Oil tank capacity | L | 1250 |
機器重量/Machine weight | KG | 31200 |
外形尺寸(高*寬*高)/Machine dimensions(L*W*H) | m | 8*2.3*3.2 |