型號Mode | Unit | SJ220 |
合型力/Die locking force | KN | 2200 |
大杠內間距/ Space between tie bars | mm | 500*500 |
大杠直徑/Tie bar diameter | mm | Φ100 |
模具厚度(最小-最大)Die thickness(Min-Max) | mm | 200~600 |
合模行程/Locking stroke | mm | 400 |
頂出行程/Ejection stroke | mm | 105 |
頂出力/Ejection force | KN | 120 |
壓射力/Injection force | KN | 280 |
壓射位置/Injection position | mm | 0、-160 |
壓射頭直徑/Plunger diameter | mm | 50 | 60 | 70 |
射料量(鋁)/Injection weight | KG | 1.5 | 2.2 | 2.6 |
鑄造壓力(增壓)/Casting pressure (Intensifg.) | Mpa | 142 | 99 | 72 |
鑄造麵積/Casting area | cm² | 154 | 222 | 305 |
最大鑄造麵積(40Mpa)/Max.Casting area (40Mpa) | cm² | 550 |
壓射頭推出距離/Plunger penetration | mm | 140 |
壓射室法蘭直徑/Casting flange diameter | mm | Φ110 |
壓射室法蘭凸出定板高度/Height of pressure chamber flange | mm | 10 |
壓射行程/Injection stroke | mm | 400 |
空循環周期/Dry cycle | S | 7 |
系統工作壓力/System working pressure | Mpa | 14 |
電動機功率/Motor power | KW | 15 |
油箱容積/Oil tank capacity | L | 550 |
機器重量/Machine weight | KG | 9500 |
外形尺寸(長*寬*高)/Machine dimensions(L*W*H) | m | 6*1.35*2.6 |