型號Mode | Unit | SJ280 |
合型力/Die locking force | KN | 2800 |
大杠內間距/ Space between tie bars | mm | 560*560 |
大杠直徑/Tie bar diameter | mm | Φ110 |
模具厚度(最小-最大)Die thickness(Min-Max) | mm | 250~650 |
合模行程/Locking stroke | mm | 460 |
頂出行程/Ejection stroke | mm | 105 |
頂出力/Ejection force | KN | 105 |
壓射力/Injection force | KN | 315 |
壓射位置/Injection position | mm | 0、-160 |
壓射頭直徑/Plunger diameter | mm | 50 | 60 | 70 |
射料量(鋁)/Injection weight | KG | 1.6 | 2.3 | 3.0 |
鑄造壓力(增壓)/Casting pressure (Intensifg.) | Mpa | 160 | 111 | 81 |
鑄造麵積/Casting area | cm² | 175 | 252 | 345 |
最大鑄造麵積(40Mpa)/Max.Casting area (40Mpa) | cm² | 700 |
壓射頭推出距離/Plunger penetration | mm | 150 |
壓射室法蘭直徑/Casting flange diameter | mm | Φ110 |
壓射室法蘭凸出定板高度/Height of pressure chamber flange | mm | 12 |
壓射行程/Injection stroke | mm | 425 |
空循環周期/Dry cycle | S | 10 |
系統工作壓力/System working pressure | Mpa | 14 |
電動機功率/Motor power | KW | 18.5 |
油箱容積/Oil tank capacity | L | 650 |
機器重量/Machine weight | KG | 12000 |
外形尺寸(長*寬*高)/Machine dimensions(L*W*H) | m | 6.4*1.4*2.7 |