| 註射裝置 INJECTIon UNIT | |||||
| 螺桿編號 | Screw Code | - | A | B | C |
| 註射壓力 | Injection Pressure | kg/ cm² | 2000 | 1550 | 1200 |
| 每註射量 | Injection Weight (PS) | g | 88 | 118 | 148 |
| oz | 3 | 4 | 5 | ||
| 螺桿直徑 | Screw Diameter | mm | 31 | 35 | 40 |
| 螺桿長徑比L:D | Screw L:D Ratio | - | 22 | 19 | 17 |
| 螺桿轉速 | Screw Speed | r.p.m. | 0-175 | ||
| 註射率 | Injection Rate | g/s | 67 | 85 | 111 |
| 塑化能力 | Plasticizing Capacity(ps) | g/sec | 8 | 11.5 | 13 |
| 合模裝置 LOCKING UNIT | |||||
| 鎖模力 | Clamp Tonnage | tons | 90 | ||
| 鎖模行程 | Toggle Stroke | mm | 300 | ||
| 模板最大開距 | Max Daylight Opening | mm | 700 | ||
| 容模量(最小-最大) | Mould Thickness(Min-Max) | mm | 125-400 | ||
| 拉桿內距 | Space Between Tie Bars | mm | 360*310 | ||
| 液壓頂出力 | Ejector Tonnage | tons | 2.2 | ||
| 頂出行程 | Ejector Stroke | mm | 65 | ||
| 其他 OTHERS | |||||
| 油壓系統壓力 | Max. Pump Pressure | kg/ cm² | 140 | ||
| 油泵馬達功率 | Pump Motor Power | kw | 11 | ||
| 電熱功率 | Heater Power | kw | 6.5 | ||
| 電源需求 | Power Requirement | A | 35 | ||
| 油箱容積 | Oil Tank Capacity | L | 190 | ||
| 機器重量 | Machine Weight | tons | 3.2 | ||
| 外形尺寸 | Machine Dimension (LxWxH) | M*M*M | 4.0*1*1.74 | ||
新手教學
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
