PO導電母粒/CMBPO-3859

產品說明：

本產品採用超導電炭黑、樹脂以及加工助劑精製而成，外觀為黑色顆粒狀，產品性能優異，不掉粉，無晶點，具有永久而穩定的導電性能，適用於制備導電聚稀烴注塑製品、片材製品以及吹膜製品。

product specification：

Made fromsuper conductive carbon,resin and processing aids, Conducting master-batch is grainy and black. The products have excellent mechanical properties and no precipitation, no fisheyes, and lasting and stable conductivity, They can be widely applied in preparing conducting PO injection products, sheet products and blow-molded products.

主要性能參數：

電阻值Resistance Value :≦50Ω

熔指Melt Index:200℃/10Kg ; 10.8g/10min

水 份Moisture:≦1.5%

註：以上數據為實驗典型值，真實可靠。本數據僅供參考，不作為正式質保承諾。

Note: The data above are all experiment typical values, true and reliable. But they serve only for reference not for quality guarantee.

使用方法：

直接添加即可。添加量45-50 wt%時可使基材電阻值降低至105Ω以下(具體添加量視導電要求而定)。

註：如產品已受潮，請乾燥後再使用，否則會影響製品外觀與性能。

Application Method:

Direct application. An addition amount of 45-50 wt% can help substrate resistance value decrease to 105Ω and even less(the addition amount is decided by specific conducting requirements).

Note: Please dry the products before using when them are moistened. Otherwise, their external appearance and performance would be affected.

存貯方法：

本產品易吸潮，貯存時用膠袋密封，置於陰涼乾燥處，特別要注意防潮。

Storage Condition:

Since easy to absorb moisture, the products should be sealed and stored in plastic bags in cool and dry places. Caution against moisture.

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。