| 建議零售價 | ¥88.00 | 品牌 | sk | 材質 | abs |
| 產地 | 平陽 | 電源方式 | USB | 動力模式 | 電動 |
| 型號 | sk | 重量 | 0.25kg | 清洗類型 | 無水洗 |
| 除毛部位 | 全身 | 工作方式 | 剃毛 | 貨號 | e710 |
| 顏色 | 白+紫 |
年底大促 | 廠商直銷，回饋大眾 |
thank you for your purchase of the Hair Remover,the quick,convenient hair removal stytem with our new sensa-light technology.Now,with the hair remover,you can eliminate unwanted hair easily and painlessly without razor blades or messy chemicals.
Instant & Pain Free hair remover includes a trimmer head attached to the unit and a microfoil head in the package.
the trimmer head works best on longer hair and the microfoil head works best on hair stubble or any short hair not removed by the trimmer head.please refer to complete directions inside.
contained within the package
trimmer head cap cleaning brush microfoil head adapter charging cable
charging the battery
NOTE:prior to first use,fully charge hair remover for approximately 2.5 hours
hair remover must be charged with the supplied USB cable,using either the supplied AC adapter or an alternate USB source.
while the unit is charging,the red light will remain on.
the green LED will remain on when unit is connected to the adapter and fully charged.charge will hold approximately 60 minutes run time.
important safety instructions- save these instructions
danger:to reduce the risk of fire or electric shock,carefully follow these instructions
for connection to a supply not in the USA,use an attachment plug adapter of the proper configuration for the power outlet.
Directions for use:
use on clean and completely dry skin with no cream or cosmetic residue.
1.remove cove(see image 1) and move switch to ON position(toward head)(see image 2).
2.Purple sensa-light technology and green LED will flash(see image 3).Unit will not turn on until it touches skin.
3.For trimmer head use:
Touch the hair remover trimmer head to skin to begin hair removal of longer hair.the purple sensa-light technology guide and the green activation LED will remain on while the unit is in use.Hold the hair remover to skin and gently glide the head of the unit along skin in the opposite direction of hair growth at a 45°angle(not straighe up and down)(see image 4).
do not apply excessive
pressure during use to aviod damage to skin or head of unit.discontinue use if any skin irritation results.
4.for microfoil head use:
for hair stubble or any short hair not removed by the trimmer head selec the microfoil head(see image 5).for best results while using the microfoil head,hold the unit straight up and down(not on a 45°angle)and apply moderate pressure(see image 6),moving the unit back and forth until hair is removed.
5.hair remover and sensa-light technology will turn off within approximately 6 seconds.green LED will return to flash.until will automatically turn on again when it comes in contact with skin.
6.when finished using your hair remover,turn switch to OFF position(away from head),cover and store in a cool dry place.
replacement and microfoil heads
to change/replac heads,place your thumbs on the back of the unit.push gently in the direction of the arrow,toward the front and in an upward motion.the head will separate from the body.(image 7)
line up new head wiht arrow on back of unit and press.head will click position.(image 8)
Care&Maintenance:
water will damage the hair remover,do not use the unit in the shower,near water,or in a damp room.
do not rinse the head under water! to clean the head,use the brush that is included in the package.Make sure the unit is turned off.
hair remover should be switched off stored in a cool dry place when not in use.
for best performance,it is NOT recommended to use the hair remover while it is charging.
warning
keep out of reach of children.
exercise caution when using around eyes.
the hiar removed contains a lithium ion battery.do not dispose of in fire.
usage:
trimmer and microfoil heads
chin knees toes thigh sideburns ankles bikini underarms arms calf
NOTE:microfoil head is for short coarse hair and hait stubble.
this device complies with part 15 of the FCC rules.operation is subject to the following two conditions:1 this device may not cause harmful interference,and 2 this device must accept any interference received,including interference that may cause undersired operation.
Notice:changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
