| 品牌 | XBee | 材質 | 2mW | 規格 | 2.4*2.3 |
| 貨號 | RB-03T027 |
XBee 2mW Wire Antenna - Series 2 (ZigBee Mesh)
無線傳輸模塊
XBee 2mW Wire Antenna - Series 2 是哈爾濱奧松機器人科技有限公司推出的一款無線通信模塊，該模塊為美國電子巨頭Sparkfun Electronic原裝進口產品。
Xbee模塊是采用ZigBee技術的無線模塊，通過串口與單片機等設備間進行通信，能夠快速地將設備接入到ZigBee網路。S2系列和基本款有著一樣的引腳定義，但是更強的輸出功率-2mW。其傳輸距離最大可達到1200米（室外空曠距離）以及高達250kbps的傳輸速率。這款模塊提供瞭非常可靠的數據傳輸，任何有串口輸出的設備都能用該模塊進行數據傳輸，支持點-點和多點的網路傳輸。
Description:
This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you updat the firmware through X-CTU.
Not sure which XBee module or accessory is right for you? Check out our XBee Buying Guide!
Note:If you are looking for a simple point-to-point configuration, you might want to try the Series 1 instead. The Series 2 requires considerable setup and configuration. We highly recommendBuilding Wireless Sensor Networks as a guide for setting up mesh networks.
Note:Series 1 and Series 2 XBee modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2 modules.
Note:If you are using these outside of the United States, please check with your local laws regarding radio communication.
Features:
3.3V @ 40mA
250kbps Max data rate
2mW output (+3dBm)
400ft (120m) range
Built-in antenna
Fully FCC certified
6 10-bit ADC input pins
8 digital IO pins
128-bit encryption
Local or over-air configuration
AT or API command set
相關產品：
XBee Pro 60mW通信模塊 第一代 Sparkfun 原裝進口 arduino 推薦
Arduino UNO R3 ATmega328P-PU控製器 2013最新版
新手教學
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
