SH-21 Hand-Held Hardness Checker SONOHARD?

The SH21 is very easy to use and requires no special knowledge of hardness testing in order to operate the instrument. The unit includes all four hardness scales and you can switch between them at the touch of a button.

|Measurement Principle|

Quick measurement (few seconds).Best repeatability and precision.Direct reading of hardness.Easy to use hand held probe can be quickly applied to a variety of surfaces from any direction.Easy to use - no prior experience of hardness measurement techniques required.Built in memory for data and calibration points.Measures Vickers, Rockwell, Brinell and Shore scales.Interchangeable probes for use with different surface profiles, pipes, concave surfaces, gears valves etc.Portable works with rechargeable lithium ion battery.

Applications

• evaluation of carburizing, standard quenching and high-frequency quenching
• Weld hardness measurement for welded structures (tanks, hulls, bridges, steel towers ,etc.)
• Hardness measurement for a gear tooth flank (narrow area)
• Measurement of structural strength or hardness of a facility
• 100% online inspection for components (engine valves, rack bars, crankshafts, bearings, etc.)

Specifications

Measuring Stand (option)

When mounted on the measuring stand, the tester can be used as a stationary hardness tester.
This compact, lightweight checker (2.5kg) can be carried around on-site.

Measurement Principle

The Handy Hardness Tester model SH-21 differs completely from traditional hardness testers. Instead of measuring the size of the indentation of the test sample using a microscope, it uses a diamond indenter equipped with a vibrating rod that presses on the test surface at a fixed load and then measures its hardness by applying ultrasonic vibrations and analyzing its damping effect. When the vibration rod is applied to a soft-surfaced test sample with identical qualities and at a fixed force, it makes a deep indentation and gets locked into the groove. Due to this, the resonance frequency increases. Conversely, it does not get locked in when used on hard test samples and the resonance frequency drops. The test sample's hardness can be calculated using the correlation between this deviation and the tested hardness.

Measurement Principle

東莞市長安日月明機器工具行

東莞市長安上沙明和電子城A區A1026鋪 TEL：0769-8155 8062   FAX：0769-8155 8063

                              E-mail:[email protected]  / www.shiningtools168.cn

    我公司成立於2008年，一直以來從事進口工具、量具、機器代理銷售商。主要銷售日本、歐美的測量機器、工具產品。本公司秉承：顧客至上，誠信第一的原則，腳踏實地一步一個階梯的發展，提供高品質、高效能的品質檢驗工具機器與客戶共同前進是我公司的經營宗旨。公司經營產品如下：
一 、扭力測試：
1、 日本製：KANON（中村）扭力工具、扭矩表、起力工具測試機、拉力棒。
2、 日本製：TOHNICHI（東日）扭力起子、扭力扳手、扭矩表、瓶蓋扭力測試機。
3、 日本製：HIOS（好握速）電批扭力測試機。

4、 日本製：CEDAR（思達）電批扭力測試機、扭力扳手。
二、力學測試：
1、 日本製：IMADA（依夢達）指針、數顯推拉力計、推拉力測試臺、瓶蓋扭力測試機。

2、 日本製：AIKOH（愛光）推拉力計及各式測試臺。
三、光學測試：
1、 日本製：PEAK（必佳）輕便式放大鏡。
2、 日本製：OOTSUKA(大塜）臺式放大鏡。
四、具量類：
1、 日本製：PEACOCK（孔雀）百分表、千分表、杠桿表、測厚表、深度表。
2、 日本製：SK（新瀉）精密針規、光麵環規、斜度規、角度計、形狀輪廓規。
3、 日本製：TELOCK（得樂）橡膠硬度計、測厚規、深度表。
4、 日本製：MITUTOYO（三豐）卡尺，量表，千分尺、高度尺。
5、日本製：ASKER（高分子）橡膠硬度計，測試臺。
6、日本製：CITIZEN(西鐵城)界限量表，電子比測機。
7、美國製：DEFELSKO（狄夫高）超音波厚度計，膜厚計。
8、日本製：JFE 超音波厚度計，硬度計、震動分析機。
9、日本製：KANETEC（強力牌）V型磁座、磁性表座、高斯計、吸磁器、退磁器。
10、德國製：KROEPLIN 外、內測卡表。
11、美國製：PTC橡膠硬度計、攜帶式金屬硬度計。
12、德國製：RHEINTACHO(樂達)轉速計、閃頻轉速計。
13、日本製：SHINWA(親和)鋼直尺、角度計、直角尺。
14、美國製：UNIVERSAL(環球)同軸度檢查機、螺孔深度規、螺帽檢查規。
15、日本製：OJYAS（奧爵士）精密塞規、環規。
16、日本製：MARUI SEIKI（丸井）角度尺。
17、日本製：FUJITOOL（富士）半徑規、角度尺。
18、瑞士製：SYLVAC（悉威）數顯百分表、千分表。
19、日本製：FSK精密水平尺；偏心檢測器。
20、日本製：SUN / SUPERTECH （太陽）間隙片。
21、德國製：PHOENIX（鳳凰）間隙片。
五、張力測試:
1、 日本製：TOKYO SEIKI（東京精機株式會社）橫向張力計及紡織專用張力計。
2、 日本製：YOKOGAWA（橫河）張力計。
六、環境及溫度測試：
1、 日本製：SATO（佐騰)紅外線測溫機,溫濕度記錄機。
2、 美國製：PTC表麵溫度計。

3、 臺灣製：TES（泰仕）溫度計，噪音計
4、 日本製：SIMCO離子風槍、靜電測定機。
七、研磨測試
1、 美國：KAY DIAMONO潤滑油、金剛石研磨膏。
2、 日本製：XEBEC(銳必克)纖維油石。
3、 日本製：AAA 研磨油石。

有關產品詳情請致電咨詢。

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。