美臣亞克力色卡對照表 

MASON Acrylic Color Table
（以下對應顏色3mm都有庫存，不需要定做）

板材特性：The features of acrylic

1. 具有極佳的透明度，拋光後晶瑩剔透，透光率達93.7%；Excellent transparency, crystal clear after being polished, light transmittance up to 93.7% ;

2. 表麵高亮光滑，絕無異物；highlighted and smooth surface without foreign matters;

3. 耐候性、耐溫性好，不會褪色失光；good weathering resistance and temperature resistance without fading and dulling;

4. 加工後性能穩定，無異味；stable performance without odor after processing;

美臣亞克力價值體現：The value of “MASON” acrylic is reflected in

1.硬度高。具有目前同等產品最高的硬度指標，平均達洛氏硬度（M）值101（詳見《化學測試報告》）； High hardness. It has the highest hardness index among the same products currently and its average Rockwell hardness is 101 (see “Chemical Test Report”);

2.板厚精度優異。厚薄公差遠高於國傢標準；Excellent thickness accuracy. The thickness tolerance is much higher than the national standard;

3.異物少。采用多層特殊過濾裝置，無塵車間，杜絕雜質摻入的可能。Few foreign matters. Special multi-layer filter unit and dust-free plant are used to eliminate the possible incorporation of impurities.

4.品質穩定。整套流水線采用達到醫藥純凈標準的全封閉形式運轉，恒溫作業，保證品質的穩定性。 4. Stable quality. The entire assembly line operates in the fully closed form meeting the pharmaceutical pure standard and at a constant temperature to ensure quality stability.

美臣亞克力性能參數

MASON Acrylic Parameter

美臣進口板材模具規格

（T:2-25mm，隨著厚度增加，使用尺寸會相應縮小）

美臣厚板模具規格

（T:30-200mm）

隻買對的，不買貴的

 Choose the right one not the expensive

  亞克力板材從原材料上區分有純新料，混合料和純回料之分。純新料亞克力抗紫外線性能優異，30年不變黃，不褪色，不開裂，透光率大於93%；抗開裂和抗化學品性能優良。而回料亞克力抗紫外線性能非常差，最多半年就會黃變，容易出現裂紋；透光率小於86%；截麵處發黃；表麵硬度低，易劃傷開裂，易老化變質。

   Acrylic sheets are classified into pure new material, mixture and pure feedback by raw material. The pure new acrylics has excellent anti-ultraviolet properties, excellent anti-cracking and anti-chemical performance with the transmittance greater than 93% without yellowing, fading or cracking for 30 years; while feedback acrylics, with poor anti-ultraviolet properties, the transmittance less than 86% and low surface hardness, will yellow at the cross sections and be prone to scratching and cracking at most half a year and is easily aged and deteriorated. 

與其他劣質產品材質、色澤度對比

Compared with the material and color of other inferior products

            美臣亞克力手感圓潤柔滑，表麵光澤度高，晶瑩剔透                             市麵上再生料亞克力，表麵光澤度差，色澤暗淡，發藍或發黃           

             Mason acrylics feel mellow and flexible, with glossy and crystal clear surface                                                Reclaimed acrylic on the market has poor surface gloss and dark color and is blueing or yellowing

采用多層特殊過濾裝置，無塵車間，杜絕雜質摻入的可能

Special multi-layer filter unit and dust-free plant are used to eliminate the possible incorporation of impurities.

整套流水線采用達到醫藥純凈標準的全封閉形式運轉，恒溫作業，保證品質的穩定性

The entire assembly line operates in the fully closed form meeting the pharmaceutical pure standard and at a constant temperature to ensure quality stability.

專業  專註  專心

Professionalization, devotion and concentration

從品質檢驗，庫存管理，到精準配送至客戶倉庫，層層把關，力求呈現完美

Check at each level from quality inspection and inventory management to accurate distribution to the customer warehouse to present perfection 

我們擁有完善的售後服務保障體系，一旦產品發現質量問題，第一時間安排相關人員解決，絕不推卸責任。

With perfect after-sales service assurance system, we will arrange relevant personnel to solve at the first time in case of quality problem in the product and never pass the buck.

   2008年4月，上海精見新材料有限公司成立。主要致力於PMMA板材及前沿高分子材料的研究及開發，公司擁有高端進口生產設備，年產量達1萬餘噸，國內外年銷售額達到2億多人民幣。目前已成為Dior、SHISEIDO、LANCOME等國際一線化妝品牌合作商，在中東、美國和俄羅斯等國傢有長期重點客戶。公司主要產品有亞克力、PETG、PET、PC、PVC微發泡板等。

    公司長期在高分子材料領域不斷地探索創新，取得瞭一定的成就，推出的”美の臣”亞克力系列，采用璐彩特（Lucite）、三菱等世界知名品牌進口原料，搭配最新型流水線生產設備，以及英國皮爾金頓（Pilkington）玻璃模具生產。產品通過瞭國傢化建中心檢驗和瑞士通標公司SGS產品檢測認證，板材透光率和洛氏硬度遠高於行業標準，可生產厚度達到200MM，充分滿足瞭高端客戶的需求。

    公司始終以滿足客戶需求為中心，專註於高端品質與服務，為客戶提供一站式解決方案，強大的技術研發團隊，為您的需求量身定做。

    精於心，見於行。承載著客戶的信任和托付，我們用心做好每一件事情，以實際行動回報客戶的厚愛與支持！

  Shanghai Kingscope New Material Co., Ltd. was established on April 2008 to provide customers with professional acrylic plates and application derivative supporting services. The company has always continued to explore and innovate in the acrylic field and integrated resources based on the purpose of meeting customer needs to enhance the core competitiveness of the enterprise. 

    “MASON” acrylic (green logo) products provided by the company are produced with the world’s top PMMA monomer and matching all kinds of latest imported assembly line production equipment as well as Pilkington glass molds imported from British. We, upholding the target of providing customers with best acrylic, constantly and carefully research in terms of manufacturing technology and seek the best methods to enhance the highest acrylic quality. 

    Refined in heart and seen in behavior. Bearing the confidence and trust of the customers, we do everything carefully and return the love and support of customers with concrete actions!

服務團隊：

參展實況：

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。