1.在第一次及每次使用完畢，以熱水（稀釋食用清潔劑）或放入洗碗機中清洗，

請勿使用具有磨蝕力的清潔劑或泡棉清洗。確保矽膠杯在每次使用前及儲藏前都已徹底乾燥。

2.烘焙時矽膠杯應分開放於平烤盤上。切不可讓模具乾烤，比如一個六連模，你隻放滿瞭3個模，

另外的3個模裡一定要裝上清水。

不然的話模具會烤壞，使用壽命會降低。
為使烘焙成品達到最好之烤焙效果，在烤焙前可先在矽膠杯表層輕輕噴灑少量防沾的烤盤油。
3.矽膠杯可耐熱至華氏500度（攝氏260度）且能承受瞬間溫度變化，比如將烤杯從冰箱直接移至烤爐中。
4.當烘焙完成時，請將整個烤盤自烤箱中移出，並將烘焙產品置放在待涼的網架上直到完全冷去。
5.矽校杯隻可使用用於烤箱，烤爐及微波爐中絕不可直接使用於瓦斯或電上，

直接在加熱盤上方或燒烤器下方使用。
6.勿使用權用刀子或其它鋒利的器具在矽膠杯上，不能重壓、拉扯、暴力相向
7.矽膠模（因為靜電的關系），它很容易吸灰塵，長時間不用時，最好放在紙盒裡，置於陰涼處。 

Mould maintenance method

1. In the first and after each use, with hot water (diluted detergent) or in the dishwasher cleaning,

Do not use with abrasive cleaner or foam. Make sure the silicone cup before each use and are completely dry before storage.

2. When baked silicone cup should be open to the baking tray. Must not let the mould dry roasted, such as a six even die, you only filled with three modules,

In the other three modules must be fitted with clear water.

Otherwise the mould will roast bad, will reduce the service life.

For the baking of baking products to achieve the best effect, can be in the silicone cup first before baking spray surface gently with a small amount of the oil pan.

3. The silicone cup can be heat to 500 degrees f (260 degrees Celsius) and can withstand the instantaneous temperature change, such as the baking cups from the freezer to the oven directly.

4. When baking finish, please remove the pan from the oven out, and will be placed in the bakery products cold rack until completely cold.

5. The silicon cup only can be used for the oven, oven and microwave oven in never can be used directly on the gas or electricity,

Directly above or below the barbecue apparatus used in heating set.

6. Do not use with a knife or other sharp instruments on the silicone cup, not weight, pulling, and violence

7. The silicone mold (because of the electrostatic), it is easy to absorb dust, long time need not when, had better put in carton, placed in the shade.