| 設備功能及配置： | TF-QT8-15型砌塊成型機特點除了繼承了TF-QT6-15全部優點外，又應用了許多新技術。
◆與TF-QT6-15型砌塊機相比，設備投資增加了約18%，產量卻提高了30%，單耗降低10%左右。
◆TF-QT8-15型機“遠程通信”控制體統，它為異地監控、故障查詢、系統升級等提供了極大的方便。
◆採用自行研製的最先進的布料新技術，當布料箱達到模具上方後，料箱內物料能快速、均勻的瀉入模腔內，可做到：各單體製品之間重量誤差±5％，強度誤差≤±15％。
◆振動箱的傳動利用變頻電機，變頻調速達到理想的激振力、振幅和振動頻率，成型製造出高質量的砌塊製品。
◆TF-QT8-15型機無論從外觀造型還是機械傳動都吸收了世界上同行技術最先進的美國哥倫比亞公司及德國的海獅、歐馬克等公司產品的優點。
Function & Assemble Parts:
Besides all the characteristics of TF-QT8-15 Type Block Making Machine, the TF-QT8-15 Type Block Mking machine applies a lot of new technologies.
◆Compared with TF-QT6-15 Block Making Machine,the equipment investment has increased by baout 16%,output has been improved by 30%,unit consumption has been reduced by about 5%.
◆TF-QT8-15 Type Block Making Machine equipped with telecommunication control system to make great convenience in monitoring in other place,fault diagnosis and system upgrade.
◆Adopts most advanced material-feeding technology,material from the hopper fall into the mould case rapidly and evenly,make the weight error less than ±5%,the intnsity error less than ≤±15％.
◆Frequency conversion motor drive the vibrationg case,easy to obtain ideal vibration force,vibration frequency and amlitrde,can produce high quality block.
◆The figure as well as the mechanical drive of TF-QT8-15 absorb advantages of product of Germany Masa Co.,Ltd.and U.S.A Columbia Co.,Ltd. which possess the most advanced technology in this industry in the world.|
| 主要技術參數： | 成型週期
Moulding Cycle
(s) | 托板尺寸
Pallet Size
(mm) | 裝機容量Power
(kw) | 整機重量Weight
(t) | 成型機外型尺寸
Overall Size
(mm) | 最高振動頻率(轉/分)
Max.vibration frequency (R/min) | | 15～18 | 850×850×25 | 38 | 約13 | 7250×6000×3500 | 4500 |
| | 理論產量表：List of Theoretical Production Capacity | | 產品Product | 規格(mm)
Dimension | 塊/托板
Pcs/Pallet | 塊/小時
Pcs/hour | 塊/天
Pcs/Day | | 標磚Brick | 240×115×53 | 36 | 8640 | 69120 | | 空心砌塊Hollow Block | 390×190×190 | 8 | 1920 | 15360 | | 多排孔磚Holes Brick | 240×115×90 | 18 | 4320 | 34560 | | 步道磚Interlock Pavers | 225×112.5×80 | 18 | 4320 | 34560 |
|
興達承諾：本公司所有售出產品，易損件除外質量保證一年！ |
