| BALLAST SPECIFICATIONS | |
| General spec. | |
| 1.Operation temperature | -40℃ to +85℃ |
| 2.Steady state light output | >3300 lumens(for 4300k) typical,bulb type dependent |
| 3.Turn on light output power | >35W after 47 sec |
| 4.Expected ballast life | >3000 hours typical |
| 5.Cooling | Conductively cooled |
| Electrical output | |
| 6.Output waveform | 400 ± 50Hz square wave |
| 7.Steady state output power | 34.5± 0.5W |
| 8.Open circuit protection(lamp is on) | Latch off ballast after 1 sec max |
| 9.Short circuit protection | Latch off ballast after 150msec max |
| 10.Start current | 4.5-5.5A initial bulb on . |
| 11.Maximum output power | 80W |
| 12.Steady state output volts | 68V to 160V |
| 13.starting voltage | < 23000V |
| Electrical input | |
| 14.Operation voltage | DC 9V to 16V |
| 15.Max. in rush current | <30A (5us) after power on |
| 16.Max. Steady state input power | 43W |
| 17.Input turn off | >16V 、<8.5V |
| 18.Input turn on | >16V 、<8.5V |
| 19.Normal input current | 3.5A±0.1A (DC 12.4V) |
| 20.Reverse voltage protection | No damage to ballast with 1V ~ 16V |
供應商：廣州博天汽車用品有限公司
電話：020-22158921
QQ：992792173
新手教學
批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。
