聯永方案 9712鏡頭 高清1080P
車載攝像機按鍵功能介紹:
1.2.7寸顯示屏 8.攝像頭 15.復位鍵
2.開關機 9.喇叭
3.模式 10.彈簧夾
4.菜單 11.AV輸出
5.上翻 12.USB插口
6.下翻 13.TF卡槽
7.確認/開始/暫停 14.DC充電
配件
說明書 USB線 USB車充(內置12V轉5V適配器)
AV輸出線
功能操作
安裝
此DVR安裝簡便,拉開⑽覆蓋在汽車玻璃上中視鏡上即可。點煙器連接上USB車充,把線材隱藏起便可。
充電:
A.使用可充電鋰電池供電
充電方式(1)連接USB車充(2)用USB連接電腦
充電過程中,綠色指示燈亮,當DVR充滿後,綠色指示燈會自動熄滅。
B.連接12V/24V車充
當汽車啟動,DVR會自動開始錄影。斷電後五秒,DVR會自動關機並自動保存前面錄制的文件。
註:隻能使用輸出電壓為5V的車載電源並且在使用車充供電時,需要按⑵或者斷電才能關閉DVR
錄像模式
按開機鍵⑵或者連接USB車充,DVR會自動進入錄影模式。(請先插入TF卡)此時,藍色燈長亮,紅色工作指示燈會閃爍,文件會自動保存於TF卡中。當拔掉USB車充或者按關機鍵⑵關閉DVR後,紅色指示燈將停止閃爍。
拍照模式
按開機鍵⑵開啟DVR並按播放鍵⑺停止錄影,然後按菜單鍵⑶進入拍照模式,按確認鍵⑺拍照。
瀏覽和刪除文件
開啟DVR並按錄影鍵⑺停止錄像,按倆次模式鍵⑶進入回放模式。按上翻鍵⑸選擇錄制的文件並按播放鍵⑺播放或者預覽。如果要刪除文件,停止播放後按菜單鍵⑷進入刪除模式。按下翻⑹選擇刪除或者格式化。繼續按菜單鍵⑷退出操作。
功能設定
開啟DVR並停止錄影,按菜單鍵⑷,進入設置菜單界面。按者下翻鍵⑹選擇具體參數,最後按確認鍵⑺確認操作。當所有設置完成後,繼續按菜單鍵⑷退出設置界面。
- 錄像分辨率:(1920×1080)(1440×1080)(1280×720)默認設置
- 語言設置:英語(默認)/俄文/日語/簡體中文/繁體中文/法語/西班牙語/意大利語/葡萄牙語/土耳其語/希臘語/德語
- 格式化:內存/TF卡(選其一格式化)
- 幀頻:15FPS/30FPS(默認設置)
- 光源頻率:50Hz(默認設置)/60Hz
- 日期/時間:待機狀態下按兩次菜單鍵⑷進入設定界面,按下翻鍵⑹進行設置,按確認鍵⑺進行保存。
- 錄影時間:關/2分鐘(默認設置)/5分鐘/15分鐘。當選擇關閉時,TF卡錄滿後將停止錄像,不會進行循環錄像
- 日期標簽:關/開(默認設置)。當選擇選擇關閉時,錄影沒有時間顯示。
- 默認設置:取消/確認。當選擇確認時,DVR將恢復到出廠設置。
- 移動偵測:關(默認設置)/開
- 錄音:關/開(默認設置)
- 版本:顯示系統版本號
下載文件
用USB線連接DVR和電腦,在顯示屏上會顯示出兩個選項(連接電腦/作為網絡攝像頭),切記需要插入內存卡。
高清TV或者顯示器預覽
用高清線連接DVR和高清電視,DVR將自動進入預覽模式,預覽方式和在屏幕上預覽步驟相同。
註意事項
- 請在錄影前先插入TF卡
- 此DVR錄影模式可選擇循環錄制,當存儲介質已滿時,DVR會自動從最初的存儲介質重新開始錄制新的內容並覆蓋舊的文件。在覆蓋舊的文件的同時,DVR將有3秒左右的時間盲區,即DVR在3秒左右的時間內會停止錄制內容。
- 請使用附帶的USB車充為DVR供電,此車充內含12V/24V轉5V適配器。如果輸出電壓大於5V,將會燒毀DVR。
技術參數
1.錄像分辨率:(1920×1080)(1440×1080)(1280×720)
2.壓縮格式:H.264
3.循環錄制
4.供電:可充電鋰電/USB車充
5.支持TF卡:最大支持到32G
6.錄音:可錄音
7.輸出:USB
Division presented:
1.2.7LCD screen 8.Camera 15.Reset
2On / off 9.Sound
3.Mode 10.Elasticity
4.Menu 11.AV output
5.Up 12.USB
6.down 13.TF
7.OK 14.DC
Accessories:
Operating Instructions USB Charger AV output
Functional operation
Installation
This DV is very simple to install,Use clamps⑽covered in the mirror。Connect the cigarette lighter, hidden line
Power supply:
A.Using the charger.
Method(1)Connect a USB charger(2)Connected to the computer
The process of charging, green light, when the DVR is fully charged, the green light will automatically extinguish.
B. Connect the charger 12V/24V
When the car starts, the DVR will automatically start recording. Power-off after five seconds, the DVR will automatically shut down and automatically save the file previously recorded.
Note: Only use the output of the vehicle power supply voltage of 5V and use the car charger power supply,⑵or power failure to turn off the DVR
Video mode
Switch of⑵or connect a USB charger, the DVR will automatically enter the recording mode.(Please install the TF card) at this time, the long bright blue light, red light flashes, documents will be automatically saved in the TF the USB car charger or press the switch (2) off the DVR, the red indicator will stop flashing.
Camera mode
⑺then click the OK button to stop recording, then press the Menu key⑶into the camera mode switch⑵the DVR, press the Enter key⑺camera.
Browse and delete files
Open the DVR and press the OK key⑺stop recording, press the two-mode key⑶to enter the playback mode. On turn key⑸select the recorded file and press the play button⑺play or preview. If you want to delete the file, stop playback, press the Menu key⑷to enter delete mode. Press the turn⑹choose to delete or formatted. Return operation to continue to press the Menu key⑷。
Function is set
The DVR to stop recording, press the Menu key (4), enter the setup menu interface. According to those who turn key⑹select specific parameters to confirm the operation, press the Enter key⑺.After completion of all the settings, continue to press the Menu key⑷return to the settings interface.
- Video size:(1920×1080)(1440×1080)(1280×720)
- Language Settings: English (default) / Russian / Japanese / Simplified Chinese /Traditional Chinese / French / Spanish / Italian / Portuguese / Turkish / Greek / German
- Format: Memory / TF card (choose one format)
- Frame rate the: 15FPS/30FPS (default setting)
- Light frequency: 50Hz (default setting) / 60Hz
- Date / Time:Two menu keys⑷standby mode, press to enter the setting interface, press the down arrow key to⑹set⑺press the Enter key to save.
- Video: Off / 2 minutes (default setting) / 5 minutes / 15 minutes. When the option to turn off the TF card is full will stop recording, does not loop video
- Date Label: Off / On (default setting). When the Select option to turn off, video is not the time display.
- Default settings: cancellation / confirmation. Select OK, the DVR will revert to factory settings.
- Motion detection: Off (the default) / open
- Recording: OFF / ON (default setting)
- Version: Displays the system version number
Download
USB cable to connect the DVR to your PC, the two options will be displayed on the display (connected to the computer / webcam), keep in mind the need to insert a memory card.
HD TV or monitor preview
Using high-definition cable DVR and HDTV, the DVR will automatically enter the preview mode, preview mode, and preview the same steps on the screen.
Note:
- Please insert the TF card in the video before the first
- This DVR recording mode selectable loop recording, when the storage medium is full, the DVR will automatically again from the original storage media to start recording a new content and overwrite the old file.Overwrite the old files at the same time, the DVR will have about three seconds of time blind, DVR will stop the recording time of about 3 seconds.
- Please use the included USB car charger for DVR-powered car charger containing 12V/24V switch to 5V adapter. If the output voltage is greater than 5V, the DVR will be burned.
Technical parameters:
1.Video size:(1920×1080)(1440×1080)(1280×720)
2.Compression format:H.264
3.Loop recording
4.Power supply: Rechargeable lithium battery / USB Car Charger
5.Support TF card: maximum support to 32G
6.Recording: recordable
7.Output: USB
批發市場僅提供代購諮詢服務,商品內容為廠商自行維護,若有發現不實、不合適或不正確內容,再請告知我們,查實即會請廠商修改或立即下架,謝謝。