一、 雙線循環式作業生產線
  1.機長(L)（座板長度lx2+150）x工作站N+2000＝L m/n
  2.機寬：2xW+300
  3.工裝板m/m(wx1)400500,500600,600700
工裝板帶電/不帶電
  4.工作站人數N(人)由客方依生產產品組裝站數決定工作站數量
  5.自動控製用阻擋器－進入水平移載機前裝置－設立臺組x2
二、 水平UP-DN 動力移載機－180度水平移載裝置2組=90度x4
三、 雙線中間架橋－BUFFER CONVEYOR2組
四、 附屬配件
  A.日光燈 40W單管高功率220v(單線全線)
  B.AIR 工具用滑軌 單線全線設立
  C.作業指示書看板 雙線A3TYPE全線設立
  D.空氣配管 雙線3/4主管Pitch每工位設立臺組
  E.插座 雙邊設立每工位設立臺組
  F.工具掛扁條 雙邊全線設立

One、 A line cycle type operation production line
  1.The machine is lengthways( L)( the bed plate length lx2+150) * work station N+2000= L m/ n
  2.Machine breadth:2xW+300
  3.The overalls board m/ m( wx1)400 x500s,500 x600s,600 x700s
The overalls board strap battery/ anti strap battery
  4.The work station number N( person) is depend on by a square to
produce the product construction to stand few decision work station quantity
  5.The automatic control uses to impede the machine － into the
level to move before carrying the machine equiped the － to establish the stand set x 2

Two、 the level UP- DN power moves to carry the machine － 180 levels
of degree to move to carry to equip 2 sets=90 degree x4s

Three、 a line builds a bridge the － BUFFER CONVEYOR2 set in the center

Four、 subsidiary fittings
  A.The fluorescent lamp 40 W list takes care of the high 220 vs of power( single line whole line)
  B.The AIR tool establishes with the slippery track  single line whole line
  C.A line of the operation direction  book billboard  A3TYPE whole line establish
  D.Compress a line of pipe arrangement 3/4 the each work potential of the supervisor Pitches establish the stand set
  E.The electric outlet is bilateral to establish the each work potential to establish the stand set
  F.The tool hangs the bilateral whole line of flat bar to establish

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。