深圳灣邊貿易美國Phantomlab進口SMR330,SMR330SR模體價格優惠，phantomlab, 價格優惠！

Specphan Phantoms模體

1,SMR330, 

Specphan330-Complete Specphan including 20cm inside diameter housing, high resolution test plate, slice thickness ramps, uniformity section, MTF point source holder and 3 SMR341 low contrast inserts and cantilever case mounting system.

2,SMR330SR  

Specphan 330SR- including 20cm inside diameter housing, high resolution test plate, slice thickness ramps, uniformity section, MTF point sourde holder and 3 solid SMR350 low contrast inserts and cantilever case mounting system
 

廠傢：The Phantom Laboratory美國模體實驗室

A New Test Tool For Single Photon Emission Computed Tomography (SPECT) and Coincidence Detection Systems The Phantom Laboratory and physicists, David Goodenough, Ph.D. and Steve Dyer, M.H.S., have worked together to develop the Specphan™ Phantom. The new Specphan™ design reliably performs routine quality assurance tests, as well as, extensive acceptance tests of single photon emission computed tomography (SPECT) and coincidence detection systems. New features and precise components extend testing capability and save time. The Specphan™'s time-saving cantilever case mount extends the phantom beyond the table edge, allowing small radius rotations previously restricted by the patient table. New test components include the externally-filled, low contrast chambers, and slice thickness test ramps. The chambers enable three levels of hot and/or cold contrasts to be evaluated in three diameters. Test ramps are used to measure slice thickness and slice position. These measurements are critical for volume and fusion imaging applications. These tests can be performed either manually or automatically through automated software available from the Institute for Radiological Image Sciences (IRIS).

Tests - Summary pixel size spatial linearity RMS noise signal to noise ratio (SNR) slice width uniformity spatial resolution point spread function slice position verification slice incrementation accuracy center of rotation verification volume sensitivity low contrast sensitivity

Stock # Description   SMR330 Specphan 330-Complete Specphan including 20cm inside diameter housing, high resolution test plate, slice thickness ramps, uniformity section, MTF point source holder and 3 SMR341 low contrast inserts and cantilever case mounting system.   SMR330SR Specphan 330SR - including 20cm inside diameter housing, high resolution test plate, slice thickness ramps, uniformity section, MTF point sourde holder and 3 solid SMR350 low contrast inserts and cantilever case mounting system.   SMR341 Fillable low contrast insert rod with 20mm, 15mm, and 10mm IDs   SMR350 Solid "cold" low contrast rod with 20mm, 15mm, and 10mm ODs

新手教學

批發市場僅提供代購諮詢服務，商品內容為廠商自行維護，若有發現不實、不合適或不正確內容，再請告知我們，查實即會請廠商修改或立即下架，謝謝。